Index of Useful Stuff

Modifications:
A Pillar Grab Handles
'Aircon' Lower Grill
Alloy Badge - Front Grill
Alloy Badge - Rear Body
Auxiliary Electrics Pt 1 - Rear Quarter Mounting Panel
Auxiliary Electrics Pt 2 - Fabrication
Auxiliary Electrics Pt 3 - Main Power Feed and Work Lights
Auxiliary Electrics Pt 4 - Circuit Components
Auxiliary Electrics Pt 5 - Wiring
Clutch Pedal Spring
Cubby Box Extended Lid
Expansion Tank Cap
Fire Extinguisher Mount
Front Bumper
Front Mud Flaps and Brackets
Glove Box 1 - Mobile Storage Systems
Glove Box 2 - Raptor Engineering
Greaseable Door Hinge Modification
Grill / Headlights / Surrounds
Gwyn Lewis Mud Shields and Rear Mud Flaps
Head Unit - JVC KD-X561DBT
Heavy Duty Front Drive Flanges
Hinge Blocks
Intercooler
Interior Lighting
Interior Lighting Update
Jack
LED Headlight Bulbs
LED High Level Brake Light
LED Side, Fog and Reverse Light Bulbs + Ferrite Rings
LED Stop / Tail Lights
Life Hammer
NAS Lights
One Piece Rear Half Shafts
Phone Holder
Rear Carpet and Side Trims
Rear Door Threshold
Rear Grab Handles
Rear Step
Receiver Hitch
Receiver Hitch Brake Light
Seat Box Corner Protectors
Snorkel / RAI
Snorkel / RAI - Air Intake Blanking Plate
Soundproofing Part 1 - Roof and Rear Load Area
Spare Wheel Cover
Split Charge System Part 1 - 2nd Battery Installation
Split Charge System Part 2 - Wiring
Split Charge System Part 3 - VSR Installation
Steering Guard
Steering Wheel
Suspension
Towing Electrics - Part 1
Tufflift Spare Wheel Sling
Variable Wiper Delay Relay
Wheels and Tyres
X-Trouser Door Catches

Security
Ardcase Pedal Lock
Ardsafe for Pedal Lock
Battery to Fuse Box Cable Relocation
Bonnet Release Cable Guard
Optimill Boss Lock
Removeable Steering Wheel Boss
Removeable Steering Wheel Boss Update
Wingtop Plate
X-Defend Column Lock

Maintenance
Battery Terminals
Central Locking Door Wiring
Engine Sensors
Rear Brake Pipes
Rear Drive Flanges
Reverse Light Switch

Welcome to my new-to-me 2.2 110 Utility Station Wagon, which I've collected today:


Click image to enlarge


Click image to enlarge
As shown, it's got the full complement of chequer plate and light guards that appear to have been fitted from new. It's also got some very shiny Sawtooth alloys but I don't know when it acquired them as they look like new. The one thing that's definitely new is the tyres, Goodyear Wrangler MT/R's, although the spare doesn't match which I'll sort out in due course.

Inside, it has a full height dog guard, a Mantec guard to the rear door glass and the upgraded stereo with the amp on the back of the cubby box. Oh, and a full set of rubber mats.

There are a couple of negatives that I need to address: it's fitted with a smaller steering wheel - a leather clad Moto Lita - and seat risers, neither of which I'm keen on.

Beyond all of that, there's still plenty of scope for a few additions to make it my own. There's an amber warning for snow in my area for tomorrow so it seems appropriate that the first is a snow cowl:


Click image to enlarge
There's more to do but they'll have to wait until after the snow  Darren

2013 Defender 110 USW XS
2013 Discovery 4 XS

"You came in that thing? You're braver than I thought!" - Princess Leia

MY 110 USW BUILD THREAD - MY 200tdi 90 BUILD THREAD - Instagram: @landroveranorak

Last edited by LandRoverAnorak on 26th Mar 2020 10:19pm. Edited 76 times in total

Looks great  2007 - Stornoway Grey 90 XS SW - Gone
2002 - Black Discovery II - Gone
2014 - Montalcino Red 110 XS SW

I like that a lot. Keep the updates coming.

Nice!

Looks great

You can log on to Land Rover Topix (if you use the vehicle Vin Number) and see if it had Sawtooths as factory fit.

Mine did, but they got swapped for Boost Alloys by the last owner

I like the Sawtooths a lot.

Very nice and the snow cowl  1996 Golf Blue 300Tdi 110 Pick up. Keeper.

Clayton.

Great wagon with some great mods the old owner had good taste. 90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html
90 V8 - Maggie http://www.defender2.net/forum/topic42564.html
110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html
D3 Hse - Fiona
Capri 2l S - Anna

Think I might have a problem............

Lovely ride 👍

Thanks for the kind words, folks.

Rashers wrote:

You can log on to Land Rover Topix (if you use the vehicle Vin Number) and see if it had Sawtooths as factory fit.

Thanks for that; just had a look. Unfortunately, whilst it says fitted with EH2 alloys, I can't find what that actually means  Darren

2013 Defender 110 USW XS
2013 Discovery 4 XS

"You came in that thing? You're braver than I thought!" - Princess Leia

MY 110 USW BUILD THREAD - MY 200tdi 90 BUILD THREAD - Instagram: @landroveranorak

Congratulations on your new purchase... it looks fabulous.. a big change from the 90.. I imagine it's a tad more refined  1993 200Tdi Defender 90

Well, it's got a radio, which is nice The back end, essentially being a van, is quite noisy and a prime candidate for some sound proofing, which is great as I've already practiced that on the 90. Darren

2013 Defender 110 USW XS
2013 Discovery 4 XS

"You came in that thing? You're braver than I thought!" - Princess Leia

MY 110 USW BUILD THREAD - MY 200tdi 90 BUILD THREAD - Instagram: @landroveranorak

Lovely

Stephen.

Looks good, I like the wheel and colour combination Keith

It was good to see that my effort wasn't wasted this morning:


Click image to enlarge
Still looks pretty cool, though


Click image to enlarge Darren

2013 Defender 110 USW XS
2013 Discovery 4 XS

"You came in that thing? You're braver than I thought!" - Princess Leia

MY 110 USW BUILD THREAD - MY 200tdi 90 BUILD THREAD - Instagram: @landroveranorak

Last edited by LandRoverAnorak on 17th Mar 2018 3:59pm. Edited 2 times in total

Looks stunning cool