Hi i need some advise please,
I have a 2012 Puma, and am fitting central locking using the OEM actuators (wiring was already there)
the system is all installed but not working
The car originally had the old style key fob, but it was stolen with original keys ( and recovered) in 2016 ,and when i got it back from repairs it had the new style fobs supplied to operate the alarm

question is what type of control unit is likely to be fitted now and can you program the new style control if that was changed when the keys were replaced ?

how can i find out which unit i have , and what options do i have to get CL working

many thanks

if you have the new type fobs, then you will have the later spec black ALM module (part number starts with a DH not a CH) look behind drivers speaker. These can be programmed to do central locking but finding someone competent can be interesting.

Ive confirmed the Part number begins with DH12 -15K

do i have to get the main dealer to code it for CL or can an independant do this ?

My Puma is a 2013 with the key with the chrome strip which I believe yours will be? I had a nightmare trying to get a key coded as no independents have the software (one mentioned Land Rover want £10 000 for the licence, not sure how true that is) and in the end, had to go to a main dealer as they're the only ones with the software to do anything with the later immobiliser (2013-2016).

Alex 2013 2.2 TDCi Puma Hard Top

https://www.defender2.net/forum/topic72473.html

Thanks Alex]

yes i have the chrome strip keys .will talk to my dealer tomorrow

KR

Paul

LRC4x4 in Congleton have the main dealer software to access the ALM modules.

AlexCW wrote:

I had a nightmare trying to get a key coded as no independents have the software (one mentioned Land Rover want £10 000 for the licence, not sure how true that is) and in the end, had to go to a main dealer as they're the only ones with the software to do anything with the later immobiliser (2013-2016).

Im not sure the nancom can access the my2015 onward alarm system........others might know better?

Well, then - just look on their website

Otters won’t know better than they do

Thought there was an update recently that meant they could access the later model alarm system. Searching for my first Defender...and started just as Covid hit, so talk about timing.

I think the ALM unit is part of the 1.36 beta Nanocom software, I'm not sure what it can do tho.

Cheers

Will 2005 90 XS
1954 86'' Series 1 tilt

See nanocom site, at bottom click on ALM section https://www.nanocom-diagnostics.com/produc...-24-22-kit

Reading the documents I’m no more enlightened as to whether you can enable central locking on the ALM module with the puma 2.4/ 2.2 software.

They have a contacts page where you can highlight your specific requirements and they will be able to advise if the nanocom can do it, what version you will need and the steps to follow if it can. https://www.nanocom-diagnostics.com/contact

If it can do what you want it may be cost effective to purchase via one of the group buys as it provides so many other benefits. Alternatively reach out to members on here that have one locally with the 2.4/2.2 puma software.

Julie wrote:

Well, then - just look on their website

Others won’t know better than they do