↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Diagnostic tester
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
bunnyman



Member Since: 29 May 2013
Location: herts
Posts: 126
England 2009 Defender 90 Puma 2.4 HT Galway Green
Diagnostic tester
Engine management light has come on drives ok anybody know of a good diagnostic tester for 2.4 tdci
Thanks bunny
Post #750143 9th Jan 2019 11:50am
View user's profile Send private message View poster's gallery Reply with quote
John64



Member Since: 10 Sep 2018
Location: Tayport
Posts: 38
Scotland 2008 Defender 90 Puma 2.4 PU Tonga Green
I recently bought the Hawkeye which is unlocked to all land rover vehicles so it works on my '08 Defender and my '14 Freelander.
Post #750150 9th Jan 2019 12:14pm
View user's profile Send private message View poster's gallery Reply with quote
ozzie1989



Member Since: 25 Feb 2009
Location: Wales
Posts: 282
Wales 2010 Defender 110 Puma 2.4 USW Bonatti Grey
Any cheap scanner will tell you the code, but no description and most won't clear it once you've fixed the issue.

I use ForScan, free software designed for Ford engines. All you need to buy is a £20 USB to OBD2 cable (it has to be the right spec though so check the ForScan site). I got mine from eBay off the back of a thread here.

You can read/reset all codes and see their descriptions. Also execute service functions such as pump learn. Also see live data, save it, graph it - great for comparing before and after a part change.

I think they are developing a mobile app one day I read.

Only downside is it won't connect to 10AS alarm unit, as it's designed for Ford, but unless you want that feature you can save a load of cash.

I also use the software on my old man's Transits and the Mrs Fiesta. It's amazing and never had an issue! Now: 2010 2.4 TDCi 110 Utility Wagon
Then: 2004 2.5 TD5 90 Hard Top (X-Tech Edition)
Post #750463 10th Jan 2019 10:33pm
View user's profile Send private message View poster's gallery Reply with quote
hornet



Member Since: 04 Jan 2010
Location: Western Europe
Posts: 373
Re: Diagnostic tester
bunnyman wrote:
Engine management light has come on drives ok anybody know of a good diagnostic tester for 2.4 tdci
Thanks bunny


I would not take cheap stuff, but something suitable. I have the nanocom and am very satisfied. Scope see here: https://www.nanocom-diagnostics.com/produc...7-2014-kit
Post #750557 11th Jan 2019 3:42pm
View user's profile Send private message View poster's gallery Reply with quote
Badger110



Member Since: 06 Feb 2018
Location: South hams
Posts: 1039
United Kingdom 2011 Defender 110 Puma 2.4 USW Buckingham Blue
ozzie1989 wrote:
Any cheap scanner will tell you the code, but no description and most won't clear it once you've fixed the issue.

I use ForScan, free software designed for Ford engines. All you need to buy is a £20 USB to OBD2 cable (it has to be the right spec though so check the ForScan site). I got mine from eBay off the back of a thread here.

You can read/reset all codes and see their descriptions. Also execute service functions such as pump learn. Also see live data, save it, graph it - great for comparing before and after a part change.

I think they are developing a mobile app one day I read.

Only downside is it won't connect to 10AS alarm unit, as it's designed for Ford, but unless you want that feature you can save a load of cash.

I also use the software on my old man's Transits and the Mrs Fiesta. It's amazing and never had an issue!


That’s brilliant, i did think of buying a small unit but this saves some cash Thumbs Up

Found the OBD connector on eBay;

https://rover.ebay.com/rover/0/0/0?mpre=ht...3070327324
Post #750565 11th Jan 2019 4:43pm
View user's profile Send private message View poster's gallery Reply with quote
MartinK



Member Since: 02 Mar 2011
Location: Clackmannanshire
Posts: 2682
United Kingdom 2011 Defender 110 Puma 2.4 USW Orkney Grey
if you haven;t seen these...
https://www.defender2.net/forum/topic38873.html
and
https://www.defender2.net/forum/topic10829.html

I have a GAP Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's)
Post #750566 11th Jan 2019 5:01pm
View user's profile Send private message View poster's gallery Reply with quote
ozzie1989



Member Since: 25 Feb 2009
Location: Wales
Posts: 282
Wales 2010 Defender 110 Puma 2.4 USW Bonatti Grey
Badger110 wrote:


That’s brilliant, i did think of buying a small unit but this saves some cash Thumbs Up

Found the OBD connector on eBay;

https://rover.ebay.com/rover/0/0/0?mpre=ht...3070327324


That's the one I have yes! Was about to posts picture but you beat me to it Razz

I used mine again to day to clear MAF fault and do pump relearn etc. after VCV change for a friend. Done in 15mins and running sweet now. Before and after values taken as well to see the improvement in real time Thumbs Up Now: 2010 2.4 TDCi 110 Utility Wagon
Then: 2004 2.5 TD5 90 Hard Top (X-Tech Edition)
Post #750609 11th Jan 2019 7:53pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums