↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Reversing light
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
sailawaybrad



Member Since: 14 May 2016
Location: Nr Exeter
Posts: 43

United Kingdom 2011 Defender 110 Puma 2.4 USW Keswick Green
Reversing light
My reversing light stopped working, so got a new bulb and removed the ladder to get access. Removed the fixture and got to the bulb, existing bulb was fine, but only getting 4.8v through to the socket. Any ideas? Where to start? 2011 2.4 110 Utility Wagon
1963 2.25 88 Soft top
Post #817191 27th Feb 2020 10:05am
View user's profile Send private message View poster's gallery Reply with quote
Martin
Site Admin


Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6463

United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Montalcino Red
You need to change the reverse switch. Not the easiest job due to access, open ended 22mm spanner needed.

Some helpful threads:

https://www.defender2.net/forum/search.php...ch+spanner  1988 90 Td5 NAS soft top
2015 D90 XS SW
Post #817198 27th Feb 2020 10:35am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
sailawaybrad



Member Since: 14 May 2016
Location: Nr Exeter
Posts: 43

United Kingdom 2011 Defender 110 Puma 2.4 USW Keswick Green
Thanks for the advice! Ordered and fitted new gearbox switch. Was relatively easy to access once I had loosened the gearbox tunnel, giving me enough room to get a deep 22mm socket on to the old switch! Much easier to undo than trying to get to it from the cubby box panel. 2011 2.4 110 Utility Wagon
1963 2.25 88 Soft top
Post #818662 7th Mar 2020 5:28pm
View user's profile Send private message View poster's gallery Reply with quote
chrisc2306



Member Since: 02 Jan 2020
Location: Glasgow
Posts: 58

Scotland 2011 Defender 90 Puma 2.4 CSW Zambezi Silver
Had the same issue, changed it this morning no problems, the access from underneath isn’t too bad with a 22mm ring spanner, and you can squeeze your hand up to it fairly easy. Definitely recommend this way rather than removing the cubby box etc
Post #857432 22nd Sep 2020 2:15pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums