![]() | Home > My Defender > Proctas Defender 300TDI |
![]() ![]() |
|
|
grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4802 ![]() ![]() ![]() |
Nice few jobs done, the heater controls are quite nice to use when they're free
![]() 1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5337 ![]() ![]() |
Well that's another job off the list
![]() Not a bad little job to do, took longer to sort out the bits than it did to fit the unit. Still needs a little check over I think, as I am not to sure about the drop links. It has really stabilized the front mind, and made the defender a lot more stable to drive. Laugh is the front anti roll bar is heavier than the rear for some reason, I will have a set of spare bushes and two clamps coming up for grabs shortly. ![]() In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 11031 ![]() ![]() |
Another job ticked off Procta
![]() 1996 Golf Blue 300Tdi 110 Pick up. Keeper. |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5337 ![]() ![]() |
I should really have gotten some more photos of the front anti roll bar installation, I did take the landy out for some diesel and quick run for some cash and dog food, I went along the road I come back from work on and the two jobs I have done so far have really made it more stable. Steering was a massive difference, I feel more connected to the road now, and it feels more stable at high speed with the wind too. I still might do a grafty and lower it I think once I am sorted.
Got something else to show off too, buy you lads will have to wait ![]() In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 11031 ![]() ![]() |
Dont forget the pic's
![]() ![]() 1996 Golf Blue 300Tdi 110 Pick up. Keeper. |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5337 ![]() ![]() |
The steering clayton was getting quite iffy for some reason. My dad had a quick once over with the steering and he said that's miles better now. Plus its made it lot safer too for me and to other road users too.
![]() In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
Enid_Puceflange Member Since: 25 Oct 2014 Location: edinburgh Posts: 1181 ![]() ![]() ![]() |
What he said Get pics up We love pics!!! ![]() |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5337 ![]() ![]() |
here is a Christmas quiz, called guess the wheels
![]() the winner gets to white letter grafty99s tyres ![]() So we have set of 5 wheels ![]() Click image to enlarge are they set of 5 of boosts Mach 5 Steelies woof steelies sawtooths MaxXtrac Blindo Zu Alloys Defender TD5 90 ---/--- Peugeot 306 HDI hatch back In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
Rosco Member Since: 03 Dec 2010 Location: Burntwood Posts: 1872 ![]() ![]() ![]() |
Mach 5's would get my vote 2007 - Stornoway Grey 90 XS SW - Gone
2002 - Black Discovery II - Gone 2014 - Montalcino Red 110 XS SW |
||
![]() |
|
trickster5000 Member Since: 12 Dec 2015 Location: East Yorkshire Posts: 521 ![]() ![]() ![]() |
Would have to be wolfs if it was my choice
![]() '89 90 CSW with a 3.5 V8 conversion (WIP) - http://www.defender2.net/forum/topic46809.html |
||
![]() |
|
grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4802 ![]() ![]() ![]() |
I guessing boosts, I hope I'm not right so then I don't have to paint my own tyres
![]() 1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
![]() |
|
L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 11031 ![]() ![]() |
Great to hear Procta
![]() ![]() 1996 Golf Blue 300Tdi 110 Pick up. Keeper. |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5337 ![]() ![]() |
today me and my mate fitted the rear swing way, and also weld the door frame a bit more, as it was starting to fail again. Then it was a case of drilling and two rivets, removing two grab handles, cleaning the holes off with the drill and trip to the screw fix place. Then the full lot bolted on, took us longer to prep than it was to do the job, I will take photos tomorrow as the light was going and the temp was dropping drastically.
Made a massive improvement mind! Defender TD5 90 ---/--- Peugeot 306 HDI hatch back In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6772 ![]() ![]() ![]() |
So which wheels are they then? Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
