![]() | Home > My Defender > Proctas Defender 300TDI |
![]() ![]() |
|
|
L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 11031 ![]() ![]() |
You must know by now if she has got a new mot, Procta
![]() 1996 Golf Blue 300Tdi 110 Pick up. Keeper. |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5321 ![]() ![]() |
So looks like its a date with the welder there, I will pick her up tomorrow, and I will have a chat what the story is with the chassis. I am suspecting that it could have been just passed last year to be sold on.
brakes I am surprised it went through, the exhaust bracket at the rear I know about, which I suspected it would fail on, Defender TD5 90 ---/--- Peugeot 306 HDI hatch back In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5321 ![]() ![]() |
we are looking at 350 to weld her, Front bumper has to come off for the front end part, the rear section where its failed on needs a fabricating sadly. exhaust hanger the one that goes on to the rear cross member, needs one welding on. I did speak about getting a replacement cross member but that would require some work to do. Would really be best to fit a galv chassis if that was the story.
She is booked in for the week after bank hol, so we can get her sorted out and push forwards. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
Profyaffle Member Since: 03 Oct 2016 Location: N Yorks Posts: 527 ![]() ![]() |
That's a real shame.. at least you can do the advisories at you leisure and the fail list wasn't too long.
Good luck with the repairs. 1993 200Tdi Defender 90 |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5321 ![]() ![]() |
yeah we can work through those anyway, with out any trouble as such, Gearbox mounts are next, mine are shot so that will be one less to worry about.
My mum has talked about lending me a few quid towards a new front bumper, but I will wait and see on that one. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5321 ![]() ![]() |
well got my replacement brackets for the exhaust on order, so fingers crossed those come tomorrow or Saturday, and that's it she goes in for a week or so for welding. Then we will see where we go from there, got some plans I want to do, But which one 1st, do I go back door, or brake upgrade , gearbox mount replacment and a service? Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
Mash Member Since: 09 Feb 2015 Location: Guernsey Posts: 1674 ![]() ![]() ![]() |
Important stuff first, cosmetics after. I would do the mounts and service then the brake upgrade with the rear door as a lower priority unless it's now falling off and being held on with black nasty and green string. 90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html
90 V8 - Maggie http://www.defender2.net/forum/topic42564.html 110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html 52HG25 lightweight https://www.defender2.net/forum/topic72342.html D3 Hse - Fiona Capri 2l S - Anna Think I might have a problem............ |
||
![]() |
|
Kit Member Since: 12 Feb 2016 Location: Shropshire Posts: 1110 ![]() ![]() ![]() |
Yeah, I agree with the above, did they specify which which bits you need to rectify to pass? 1993 200 Tdi 90 CSW
1956 Series 1 Hard-top 1958 Series 1 Soft-top |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5321 ![]() ![]() |
kit, it was these three
Rear Exhaust system not adequately supported (7.1.1) Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top and inner of chassis (6.1.B.2) Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) the brackets are on their way for the exhaust, I will have to strip the front down a little for the welding access. Looks like the brackets for the gearbox are next on the cards then mash. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
Mash Member Since: 09 Feb 2015 Location: Guernsey Posts: 1674 ![]() ![]() ![]() |
![]() ![]() 90 V8 - Maggie http://www.defender2.net/forum/topic42564.html 110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html 52HG25 lightweight https://www.defender2.net/forum/topic72342.html D3 Hse - Fiona Capri 2l S - Anna Think I might have a problem............ |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5321 ![]() ![]() |
sad thing is mash, she is my daily, I have had to revert back to my old daily until she is fixed . Another thing that's biting me, is the doe, This time last year I had over time coming out my arse! Now its basic flat rate now with very little over time
![]() ![]() In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
Mash Member Since: 09 Feb 2015 Location: Guernsey Posts: 1674 ![]() ![]() ![]() |
Work I'm sure will pick up and you can buy the shinny bits again
![]() ![]() 90 V8 - Maggie http://www.defender2.net/forum/topic42564.html 110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html 52HG25 lightweight https://www.defender2.net/forum/topic72342.html D3 Hse - Fiona Capri 2l S - Anna Think I might have a problem............ |
||
![]() |
|
Procta Member Since: 04 Dec 2016 Location: Sunderland Posts: 5321 ![]() ![]() |
I have that much I want to do, its one of those things on what do I do 1st
![]() Work will pick up but it could be next year, at the moment Nissan launching two new cars, new Leaf and the new juke, ( contracts for that is still work in progress) Defender TD5 90 ---/--- Peugeot 306 HDI hatch back In the words of my Good Friend, Gary Forrest 1980 -2025 " we will work something out" |
||
![]() |
|
Profyaffle Member Since: 03 Oct 2016 Location: N Yorks Posts: 527 ![]() ![]() |
It's unfortunate when things have to be done while you have plans for improvements elsewhere.. like my wobbly wheel that needs sorting before anything else..
![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
