↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Warn Winch Kit: VPLDP0113
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Martyn



Member Since: 10 Feb 2011
Location: Stourbridge, West Midlands
Posts: 151
United Kingdom 2014 Defender 90 Puma 2.2 PU Keswick Green
Warn Winch Kit: VPLDP0113
Has anyone had the above kit fitted to a new Defender recently?

Microcat isn't good at listing what comes in the kit.

Can anyone tell me, does the kit include a centre console mounted cut out switch and Warn winch cover for the 9.5ti unit?

Thanks.
Post #308613 16th Feb 2014 4:43pm
View user's profile Send private message View poster's gallery Reply with quote
Supacat



Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018
United Kingdom 2013 Defender 110 Puma 2.2 XS DCPU Keswick Green
Might not help as it's a different partnumber but list of included items for a winch fitting kit are here:

http://topix.landrover.jlrext.com/topix/co...tabs=false
Post #308671 16th Feb 2014 7:11pm
View user's profile Send private message View poster's gallery Reply with quote
Martyn



Member Since: 10 Feb 2011
Location: Stourbridge, West Midlands
Posts: 151
United Kingdom 2014 Defender 90 Puma 2.2 PU Keswick Green
Yerrr I already had a nosey on Topix ta. The current Winch kit is not listed and by the looks of the instructions, that's a very old part.
Post #308676 16th Feb 2014 7:26pm
View user's profile Send private message View poster's gallery Reply with quote
a13x



Member Since: 25 Sep 2011
Location: Burton on Trent
Posts: 554
United Kingdom 
My 2011 had the cut off switch fitted. Believe the cover is an additional cost. I have one but virtually impossible to fit! (I do have svx grill which may make a difference)
Post #308700 16th Feb 2014 8:34pm
View user's profile Send private message View poster's gallery Reply with quote
Greener78



Member Since: 18 Apr 2013
Location: Keswick
Posts: 48
2015 Defender 110 Puma 2.2 XS CSW Montalcino Red
Had it fitted to my 13 plate back in July. Switch and cover both supplied. Haven't used the cover yet tho.
Think you might have to remove the numberplate and refit, simple pin to pull out.
Post #308818 17th Feb 2014 10:57am
View user's profile Send private message View poster's gallery Reply with quote
Martyn



Member Since: 10 Feb 2011
Location: Stourbridge, West Midlands
Posts: 151
United Kingdom 2014 Defender 90 Puma 2.2 PU Keswick Green
Thanks for that greener.

Funny you mention about the number plate pin. Dealer have asked if I want the number plate mounted centrally or to the left on the bumper. At the time, I was unsure how the cover if any would fit with the plate in the centre.

Did they have to cut your grille unit to accommodate the main winch unit?
Post #308925 17th Feb 2014 7:11pm
View user's profile Send private message View poster's gallery Reply with quote
kingofthesparks



Member Since: 06 Jan 2011
Location: Very close to Watford gap services , northants
Posts: 987
United Kingdom 2012 Defender 90 Puma 2.2 HT Fuji White
No grill cut required though instructions say it is required Confused
Post #308937 17th Feb 2014 8:11pm
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5919
2006 Defender 110 Td5 USW Zermatt Silver
Agree with above. Instructions say cut but not needed.

Andy
Post #308952 17th Feb 2014 9:26pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums