![]() | Home > Maintenance & Modifications > How much for a new clutch in a TD5 110CSW |
|
|
|
| charliebaja Member Since: 05 Aug 2013 Location: Surrey Posts: 211
|
Just wanted to know if anyone could help me as I am after some quotes to change my clutch in a 110 CSW TD5. Its currently making a whirring sound when i put my foot down on the pedal before engaging gear and I think there is a bit of slipping near third. I think its the release bearing but it would make sense to replace the clutch at the same time!!
Can anyone give advise? |
||
|
| Tiger Member Since: 06 Jul 2012 Location: Wales Posts: 2265
|
£800
|
||
|
| charliebaja Member Since: 05 Aug 2013 Location: Surrey Posts: 211
|
Is that parts and fitted?
|
||
|
| Blacktt600 Member Since: 30 Nov 2013 Location: Leeds Posts: 125
|
with the flywheel as well? |
||
|
| Steve B Member Since: 22 May 2009 Location: Warwickshire Posts: 589
|
|||
|
| Lou Sparts Member Since: 15 Apr 2012 Location: Kent Posts: 1501
|
Spigot bush noise is standard fit on a Td5 but don,t worry about it because when the fuel pressure regulator leaks the diesel runs down the back of the engine and into the bellhousing and lubricates it
Steve |
||
|
| Tiger Member Since: 06 Jul 2012 Location: Wales Posts: 2265
|
Yep, clutch & DMF was £800
|
||
|
| bga86 Member Since: 17 Jan 2014 Location: Here and there Posts: 205
|
New spigot bushes don't squeal if you put a tiny bit of loctite on them when you put them in
|
||
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis











