↓ Advertise on Defender2 ↓

Home > Technical > TD5 rocker gaskets.
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5745
United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
TD5 rocker gaskets.
My understanding there are two gaskets available, early one and a later one.
What are the differences?
I am still chasing the oil leaks and yesterday after a 40 min drive I popped the bonnet to check for leaks and spotted a tiny wisp of fumes coming from the rear of the rocker gasket.
Which got me wondering if the later gaskets have a slightly bigger half moon section? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #227082 14th Apr 2013 10:03am
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6043
United Kingdom 2006 Defender 110 Td5 SW Epsom Green
When i fitted the new head to my 90, twice... i just used some gasket sealer either side of said rocker gasket... no leaks at all Thumbs Up
Post #227093 14th Apr 2013 10:43am
View user's profile Send private message View poster's gallery Reply with quote
derbywill



Member Since: 25 Mar 2010
Location: Derbyshire
Posts: 541
England 2005 Defender 90 Td5 XS CSW Java Black
Earlier td5 gaskets do have a smaller Half moon section if you've fitted the earlier type it will leak like anything !
Will 2005 90 XS
1954 86'' Series 1 tilt
Post #227111 14th Apr 2013 11:36am
View user's profile Send private message View poster's gallery Reply with quote
barbel jim



Member Since: 12 Dec 2012
Location: Northants
Posts: 1412
United Kingdom 2005 Defender 90 Td5 HT Tonga Green
diesel_jim wrote:
When i fitted the new head to my 90, twice... i just used some gasket sealer either side of said rocker gasket... no leaks at all Thumbs Up


I only did the half moons with RV silicon and have had the same result Thumbs Up
Post #227126 14th Apr 2013 12:31pm
View user's profile Send private message View poster's gallery Reply with quote
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5745
United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
You must be the lucky ones!. Would an a later gasket fit an ealier head (mine is an AMC head)? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #227132 14th Apr 2013 12:54pm
View user's profile Send private message View poster's gallery Reply with quote
geobloke



Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410
United Kingdom 
IIRC the rocker cover bolts have to be torqued down to about 7 ftlb, which is not very tight, if you over tighten them the gasket will deform and you will get leaks.

I like the gasket sealer idea though...
Post #227140 14th Apr 2013 1:34pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums