Tim seymour wrote:

Hi i have just used my atric for codes and found po606 and po234 what are these and should i be worried cheers tim

You get that every now and then, nothing to worry about. BTW, you can look up these error codes in the workshop manual (http://www.mediafire.com/?6vfad0z0bzso7)

P023400

Turbocharger A over boost condition

Turbocharger circuit fault
Turbocharger fault
Engine control module (ECM) fault

Check the turbocharger and circuits. Refer to the electrical guides. Rectify as necessary. Check turbocharger operation, check for sticking turbocharger vanes etc.. Install a new turbocharger if necessary. REFER to: Turbocharger (303-04B Fuel Charging and Controls - Turbocharger - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma, Removal and Installation).
Clear the DTCs and test for normal operation. Refer to the warranty policy and procedures manual if a module is suspect. --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ

Naks wrote:

Tim seymour wrote:

Hi i have just used my atric for codes and found po606 and po234 what are these and should i be worried cheers tim

You get that every now and then, nothing to worry about. BTW, you can look up these error codes in the workshop manual (http://www.mediafire.com/?6vfad0z0bzso7)

P023400

Turbocharger A over boost condition

Turbocharger circuit fault
Turbocharger fault
Engine control module (ECM) fault

Check the turbocharger and circuits. Refer to the electrical guides. Rectify as necessary. Check turbocharger operation, check for sticking turbocharger vanes etc.. Install a new turbocharger if necessary. REFER to: Turbocharger (303-04B Fuel Charging and Controls - Turbocharger - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma, Removal and Installation).
Clear the DTCs and test for normal operation. Refer to the warranty policy and procedures manual if a module is suspect.

Quote:

thanks great help

bell-auto-services wrote:

If you want a quick look up while on the move for the code you can enter the P code in the search box of my web site for the text meaning.

http://bellautoservices.co.uk/bas-remap-interface/

Pete

thanks Pete cleared the codes only the po606 came back once againthanka to all  Cess the Taswegian