 | Home > Tdi > 300tdi fitting a new aux belt |
 
|
|
|
| sense of adventure Member Since: 11 Nov 2011 Location: warwickshire Posts: 147   
|
10 minutes max, very easy
15mm socket on a knuckle bar to remove to tension and a 15mm spanner needed, it's pretty self explanatory just take note of the belt track |
||
22nd Apr 2012 6:59pm |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 
|
cheer SoA ... I'll pick up a belt tomorrow and have a go ... just never done it before
found it in the 300tdi WSM ... looks like I can do that  |
||
|
22nd Apr 2012 7:06pm |
|
| LRSoffroad Member Since: 15 Feb 2012 Location: Doncaster Posts: 189 
|
Dead easy bpman you will have it done in no time
|
||
|
22nd Apr 2012 7:58pm |
|
| jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8365  
|
POP, as above 15mm socket on a breaker bar is all you need. 2mins. Cheers
James 110 2010 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
|
22nd Apr 2012 8:07pm |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069
|
MrsBPMan is going to collect one tomorrow and I'm going to do it tomorrow night ..
how long should the OE belts last ? Mine's less than a year old ... (and don't tell me off roading has shortened it's life ... it's a land rover  ) |
||
|
22nd Apr 2012 8:38pm |
|
| bm52 Member Since: 04 Apr 2010 Location: Kent Posts: 2189 
|
Suggest you take the engine number as there are 2 belt lengths and I found MY didnt help. BM52
|
||
|
22nd Apr 2012 10:06pm |
|
| bm52 Member Since: 04 Apr 2010 Location: Kent Posts: 2189
|
Suggest you take the engine number as there are 2 belt lengths and I found MY didnt help. BM52
|
||
|
22nd Apr 2012 10:07pm |
|
| sense of adventure Member Since: 11 Nov 2011 Location: warwickshire Posts: 147
|
my old 300 defender belt lasted 3 years (no air con) my old 300 disco with ac would last about 9-12 months.
check pulley bearings, water pump etc for wear and alignment before refitting, also your tensioner may start to squeal with a new belt, use silicone spray on the belt (not wd40!) and white grease as appropriate on the tensioner pulley. |
||
|
22nd Apr 2012 10:12pm |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069
|
found a video ...
http://www.youtube.com/watch?v=aipB15NArOc |
||
|
23rd Apr 2012 7:33am |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069
|
all done, 10 minute job .. all done and tested
good call BM52, I called the dealer with the chassis number they found the right one. |
||
|
23rd Apr 2012 7:28pm |
|
| bm52 Member Since: 04 Apr 2010 Location: Kent Posts: 2189
|
BM52 |
||
|
23rd Apr 2012 7:35pm |
|
| LRSoffroad Member Since: 15 Feb 2012 Location: Doncaster Posts: 189
|
tod you easy as pie
 |
||
|
23rd Apr 2012 9:26pm |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069
|
yyyyuuupp
|
||
|
23rd Apr 2012 10:02pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
