 | Home > Technical > Help! - No start |
 
|
|
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5996   
|
Wire fallen off the solenoid the for the starter? 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
27th Jun 2025 11:16am |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6675 
|
Cluster not passing through immobiliser signal?
Give the top of the cluster a thump.  1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
27th Jun 2025 11:23am |
|
| Ianh Member Since: 17 Sep 2018 Location: Essex Posts: 2408
|
Did you open and close one of the second row doors ?
Check your 10AS fuses, one may have blown due to a short on the B pillar central locking loom. Two in under seat fuse box, one in under dash fuse box. https://www.lrworkshop.com/electrics/defen...nd-headers Last edited by Ianh on 27th Jun 2025 11:40am. Edited 1 time in total |
||
|
27th Jun 2025 11:33am |
|
| bear100 Member Since: 22 Mar 2010 Location: South Wales Posts: 2015  
|
Managed to bump start so we’re up and running. Looks like I’ve got an issue with the starter motor. Solenoid is clicking but no attempt to spin on the start. Back on route to billing off road show any kind souls see a black 110 with an Ozpod setup. Give us a hand for beer tokens! 👍 2023 Defender L663 V8
2016 Range Rover Autobiography 4.4 TDV8 (gone) 2010 110 XS Utility 2.4TDCI 2010 Range Rover Sport TDV8 (gone) 2007 Discovery HSE TDV6 (gone) 1993 110 csw 200 tdi (gone) 1994 90 HT 300 tdi (gone) 1994 discovery 300tdi (gone) 90 hybrid 3.5 v8 (gone) Range rover bobtail 3.5 v8 (gone) |
||
|
27th Jun 2025 11:40am |
|
| Ianh Member Since: 17 Sep 2018 Location: Essex Posts: 2408
|
Did you change your main relay after the issue you posted in another topic recently?
|
||
|
27th Jun 2025 11:44am |
|
| johnlad Member Since: 18 Dec 2023 Location: Blackpool Posts: 85
|
I don’t mind lending a hand if you need it. Not brilliant on electrical stuff but have a basic socket set with me.
|
||
|
27th Jun 2025 2:18pm |
|
| bear100 Member Since: 22 Mar 2010 Location: South Wales Posts: 2015
|
Cheers Johnlad!
Ianh ordered one online but didn't turn up in time, I think this is a different fault? This time the dash performed as it should needles and lights as they should be, just nothing when it’s turned for the starter to engage, swapped relays (main and starter) the same. I could feel the starter relay clicking too. Bumped it luckily and made it to Billing show. Turned engine off and it restarted perfectly fine every time??? 2023 Defender L663 V8 2016 Range Rover Autobiography 4.4 TDV8 (gone) 2010 110 XS Utility 2.4TDCI 2010 Range Rover Sport TDV8 (gone) 2007 Discovery HSE TDV6 (gone) 1993 110 csw 200 tdi (gone) 1994 90 HT 300 tdi (gone) 1994 discovery 300tdi (gone) 90 hybrid 3.5 v8 (gone) Range rover bobtail 3.5 v8 (gone) |
||
|
27th Jun 2025 2:24pm |
|
| johnlad Member Since: 18 Dec 2023 Location: Blackpool Posts: 85
|
Sounds like a connection issue or battery maybe weak
|
||
|
27th Jun 2025 2:35pm |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5996
|
Sticking starter solenoid ? Might find a rebuild kit at Billing. 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
|
27th Jun 2025 2:35pm |
|
| bear100 Member Since: 22 Mar 2010 Location: South Wales Posts: 2015
|
Battery all good - twin optima’s fully charged, terminals tight and secure.
I know the ignition switch is good because the starter relay was clicking, still could be the relay I suppose? Or the solenoid? Tried again this morning and it starts with no issue 
The starter look a pig to do, anyone done it on the drive? 2023 Defender L663 V8 2016 Range Rover Autobiography 4.4 TDV8 (gone) 2010 110 XS Utility 2.4TDCI 2010 Range Rover Sport TDV8 (gone) 2007 Discovery HSE TDV6 (gone) 1993 110 csw 200 tdi (gone) 1994 90 HT 300 tdi (gone) 1994 discovery 300tdi (gone) 90 hybrid 3.5 v8 (gone) Range rover bobtail 3.5 v8 (gone) |
||
|
28th Jun 2025 8:04am |
|
| johnlad Member Since: 18 Dec 2023 Location: Blackpool Posts: 85
|
If it’s a td5 then the top bolt requires a selection of extensions to get a socket on it. Once that’s out the other 2 are straightforward
|
||
|
28th Jun 2025 8:32am |
|
| landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5948 
|
I believe it’s a 2.4 Tdci 👍🏻
|
||
|
28th Jun 2025 10:03am |
|
| johnlad Member Since: 18 Dec 2023 Location: Blackpool Posts: 85
|
I skipped a generation there so I’ll be no use on this repair
|
||
|
28th Jun 2025 3:40pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
