DEFENDER2.NET - View topic - Passenger rear tail light

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Passenger rear tail light

Page 1 of 1

Print this entire topic ·

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

1998 Defender 110 300 Tdi DCPU Keswick Green

Passenger rear tail light

Passenger side tail light has an intermitent fault where it doesnt work but the brake light does. Its an led unit, it works when plugged into the driver side. Ive replaced the chassis loom for a brand new one from autosparks. And ive cleaned the earth point in the engine bay to and checked all fuses on the dash

Is there anything obviousr ive missed?

29th Nov 2017 4:57pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

Is the LED unit a bulb or a complete unit like you get in the LED upgrade sets?

Are you getting 12v to the plug or unit?

29th Nov 2017 5:32pm

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

Wipac unit and the brake light part works havbt had chance to test yet

29th Nov 2017 5:35pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

check connect behind Rh rear trim panel the Passenger rear tail light wire links up with the trailer socket at this point

29th Nov 2017 5:35pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20922

Have you checked Earth continuity and for voltage using a Multimeter?

From there, you can roughly I.D. The issues, and start to trace from there.
It could possibly be high resistance on the connector pins also, ensure they are clean and dry. ____\We|Will|Win/___
____/🇬🇧🇺🇸\____
_//*⛽️🛢️⚙️🧰*\\_

29th Nov 2017 5:39pm

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

Just put test on and im not getting 12v to the plug

Ive checked and tested all fuses inside the cab and cleaned the earth that comes off the three plug loom and bolts to the bulkhead.

Any ideas where to look next

8th Dec 2017 6:29pm

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

dorsetsmith wrote:
check connect behind Rh rear trim panel the Passenger rear tail light wire links up with the trailer socket at this point

Is there a connector to join?

8th Dec 2017 6:39pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

Click image to enlarge

8th Dec 2017 7:23pm

Rad666

Member Since: 21 Jun 2016
Location: North yorkshire
Posts: 89

So its already joined? Ive just been reading your old posts, i think i might have alook behind the dash

8th Dec 2017 7:37pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum