 | Home > Maintenance & Modifications > Air box mod and decat |
 
|
|
|
| Yannis Member Since: 02 Feb 2015 Location: Oxfordshire / Milan Posts: 402   
|
Scroll up a few posts on page 10. Should still be some pictures there.
|
||
13th Jan 2023 7:20am |
|
| roel Member Since: 08 Aug 2009 Location: Lelystad Posts: 2039  
|
The air goes through a piece off pipe along the btm off the airbox. In the photo the top half is cut off.
I didn't do that I just cut the last inch off as there is a lip that should catch the water what should go to the outside off the pipe due to the propeller. Roel 1984 90 2.5 na Diesel - RR V8 (1994-2001) 1997 Camel Trophy Discovery 300TDI (2001-2009) 2005 G4 Discovery III 4.4 V8 (2008-2018) It's gone but it still hurts. 2003 90 Td5 (2009-now) |
||
|
13th Jan 2023 7:20pm |
|
| nitram17 Member Since: 09 Jun 2014 Location: newcastle Posts: 2260 |
im a little confused
 do you have any pics? as it sounds like you have just cut off one inch of the pipe top at the proximal end.......Will that have much of an effect? |
||
|
13th Jan 2023 10:18pm |
|
| roel Member Since: 08 Aug 2009 Location: Lelystad Posts: 2039
|
I took the propeller out and took the inside lip off. That lips is about 10 mm, I think so the diameter got 20 mm bigger.
I am not sure about how effective that is but as I sealed the airbox for off-roading, there is no need to catch the water. I can't go anywhere to the outside. Roel 1984 90 2.5 na Diesel - RR V8 (1994-2001) 1997 Camel Trophy Discovery 300TDI (2001-2009) 2005 G4 Discovery III 4.4 V8 (2008-2018) It's gone but it still hurts. 2003 90 Td5 (2009-now) |
||
|
14th Jan 2023 6:56pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
