↓ Advertise on Defender2 ↓

Home > V8 > V8 Compression Test
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Mknoxc



Member Since: 17 May 2021
Location: Sussex
Posts: 1

United Kingdom 2011 Defender 110 Puma 2.4 SW Zermatt Silver
V8 Compression Test
I have acquired a 1992 Rover V8 3.5 engine s/n 24G10456B. It came out of a fire truck so has not had a lot of use. I have performed a compression test on the cold engine and six of the cylinders were good at 120 psi (it’s 8.13 to 1), however cylinders five and six are 105 and 100 psi. I squirted some oil into the cylinders and now cylinder five is 120 psi and six is 110 psi.

My question is should I replace the piston rings in those two lowest cylinders that are 100 and 105 psi cold, or can I expect them to be OK when engine is warm?
Post #972120 23rd Nov 2022 10:47am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2022 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums