DEFENDER2.NET - View topic - Bilstein shock install help

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Bilstein shock install help

Page 1 of 1

Print this entire topic ·

airpusher

Member Since: 04 Sep 2011
Location: South Wales
Posts: 372

2006 Defender 110 Td5 XS DCPU Zambezi Silver

Bilstein shock install help

Ok,

Just swapping over the rear shock for old standard to bilstein at standard height.

The fitting are slightly different so I thought I’d check with the collective experience on here if I have it right.

The photos show both old and new, old as it came off, new as I’m thinking it goes back on.

Main difference is the top with only one of the large wash (not sure of the technical name) and again at the bottom, the last wash is a different shape.

Any advice would be greatfull

Click image to enlarge

Click image to enlarge 2006 Defender Double Cab- Zambezi Silver

18th Apr 2019 12:51pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20788

The upper washers have the tapered side towards the bush.
Again the same with the lower bushes also. 👍🏻 WeWillWin🇬🇧🇺🇸
⛽️🛢️⚙️🧰💪

18th Apr 2019 12:54pm

airpusher

Member Since: 04 Sep 2011
Location: South Wales
Posts: 372

Thanks Custom90,

That makes sense, on the bilstein at the top, there is only one washer in the pack, the original had 2?! Is that normal?

My options seem to 2 large washers at the top but then I’m short one at the bottom or 1 at the top and 2 at the bottom!

Mmmm

Click image to enlarge

Click image to enlarge 2006 Defender Double Cab- Zambezi Silver

18th Apr 2019 1:11pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20788

There should be 2x washers at the top, they should be identical too.
If you haven't got two of them they must be missing. WeWillWin🇬🇧🇺🇸
⛽️🛢️⚙️🧰💪

18th Apr 2019 2:11pm

airpusher

Member Since: 04 Sep 2011
Location: South Wales
Posts: 372

Ok, that makes sense then.

The two identical ones on the top, then on the bottom, the stepped one, bush, then through axl, bush and I must have to use the wash that was existing then. As they only supplied one of that type.

Click image to enlarge

Cheers 2006 Defender Double Cab- Zambezi Silver

18th Apr 2019 2:42pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum