DEFENDER2.NET - View topic - 90 Puma Hardtop Arch height Help please.

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > 90 Puma Hardtop Arch height Help please.

Page 1 of 1

Print this entire topic ·

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 7682

2011 Defender 110 Puma 2.4 USW Stornoway Grey

90 Puma Hardtop Arch height Help please.

I don't suppose anyone could please measure the height from the ground to the bottom of the eyebrow (above centre of wheel) at the front and rear, both sides, on a 90 Hardtop unladed on std suspension on 235.85s fitted to Boosts @ 25-30psi, parked on level ground. Sorry big ask i know.

i am after a rough figure, i know there are many possible variations, full tank full compared to nearly empty and vehicles not loaded the same but it will give me a starting point.

Click image to enlarge Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop

6th Nov 2018 10:55pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

2013 Defender 110 Puma 2.2 USW Orkney Grey

You can remove tyre size from the list of variables by measuring from the wheel centre. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

6th Nov 2018 11:02pm

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 7682

i know, but i thought people might find that harder guessing the middle of the rim esp if the logo is the wrong way up!.... i was trying the simple. Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop

6th Nov 2018 11:04pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

Fair enough

Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

6th Nov 2018 11:16pm

Harry.O

Member Since: 25 Jul 2014
Location: Warwickshire
Posts: 704

Hi JST, whilst not specifically answering your question, there are a few measurements here which may help.

https://gwynlewis4x4.co.uk/wp-content/uplo...rments.pdf 2005 Td5 110 Hardtop
1989 300Tdi 90 Soft top
1992 200Tdi 90 Truck cab with Land Cruiser axles

7th Nov 2018 6:28am

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 7682

great link thank you.

mine are 285mm front (std 250-260) and 280 mm rear (std 300) working off Gwyns measurements.

so too high at front and too low on rear! swapping them around would help possibly not sure on front spring rates though.

Time to find some std springs. Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop

12th Nov 2018 3:54pm

Procta

Member Since: 04 Dec 2016
Location: Sunderland
Posts: 4932

What we used to say back in the days of the 306. " that needs a 40mm drop and some cyclone alloys"
thats an old peugeot 306 joke from back in the day

I would fit good standard springs alround or a decent quailty upgraded one if you have the budget. I am thinking on changing my terramera stuff, as i dont rate the dampers at all. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back

Success is 90% Inspiration and 4 minutes Preparation # you can make it!

12th Nov 2018 9:43pm

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 7682

I will go genuine if i change them, or oem equivalent . Its running tf springs and shocks both of which are shocking..... Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop

12th Nov 2018 9:50pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum