• Forum
• Gallery
• Shop
• Sponsors

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Defender > Td5 110 csw, Lowered, led's, Tints and Puma seats

Page 47 of 81 < 1 2 3 ... 46 47 48 ... 79 80 81 >

Print this entire topic ·

BuckBlu110 Member Since: 19 Apr 2014 Location: in the pub Posts: 731

Here's some pics of it fitted; Front Click image to enlarge Back Click image to enlarge Here's the wiring diagram I used Click image to enlarge Click image to enlarge For the switches on the front of cubby pin outs are: 1:earth 2:fused live 3:pin 5 on the rear switch 4:pin 2 on the rear switch 5:fused live 6:illumination For the switches at the rear of the cubby, so for the second row seats, pins are: 1:isolation switch 2:pin 4 on the front switch 3:window motor (up) 4:window motor (down) 5:pin 3 on the front switch 6:illumination Make sure you have the correct switches for the front and rear positions, the switches at the front of the cubby are all black and are basically the same as defender window switches, the rear switches however are different and have a grey base to them, they're different inside to as I found out the hard way when the front switches would work perfectly but every time I used the rear switches (i had black based switches the same as the front to start with) they kept blowing the fuse, once I plugged the grey based switches in it worked fine. Hope this helps

9th Sep 2017 6:37pm

BuckBlu110 Member Since: 19 Apr 2014 Location: in the pub Posts: 731

I haven't wired the isolation switch yet as I haven't found a connector for it yet so have just earthed them as the isolation switch only switches the earth. The only issue with the sunroof panel I've found is that you have to be careful cutting the hole in the back of the cubby as there is very little room for error on the one edge of the panel, as the clips are right on its outer edge meaning that if you cut too much of the outer vinyl or leather, it'll leave a gap between the panel and whatever's covering your cubby. Thankfully trim glue saved the day on that one Hopefully if all that makes sense, you'll see what I mean when you get yours

9th Sep 2017 6:50pm

bankz5152 Member Since: 02 Feb 2017 Location: South London/North Kent Posts: 2217	Smart! Very smart! I was thinking of putting smaller switches (from a BM) on the door card and a button on the dash that just raises the rear windows to the top
9th Sep 2017 7:00pm

mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6772	That's brilliant, thanks buckblu I'll go through all that later. Ray My build thread http://www.defender2.net/forum/topic17615.html
9th Sep 2017 7:13pm

mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6772	Bloody photobucket I've just spent ages replacing most of the early photos on this thread so it makes some sense. Only one or two missing now but what a pain they should be strung up! Ray My build thread http://www.defender2.net/forum/topic17615.html
11th Sep 2017 5:29pm

mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6772

So the rear electric windows are all in and working but I wasn't happy with the provided mount for the switches so decided to to put them in the doors. Managed to get the surrounds for the switches in this evening Click image to enlarge A bit neater than the switches hanging out of the door cards So as mentioned above I just need to wire the rear switches up so I have a set in the front so I can use them while driving Ray My build thread http://www.defender2.net/forum/topic17615.html

11th Sep 2017 8:06pm

BuckBlu110 Member Since: 19 Apr 2014 Location: in the pub Posts: 731	Looks a top job
11th Sep 2017 9:24pm

mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6772	Thankyou it's another job that's temporary though. I'm just trying to get everything I want together and working so when I sort the new doors out it can put it all back together easier  Ray My build thread http://www.defender2.net/forum/topic17615.html
11th Sep 2017 10:21pm

Tiger Member Since: 06 Jul 2012 Location: Wales Posts: 2265	Nearly a month and no updates? (sorry make that 2!!)
10th Nov 2017 12:08pm

Kit Member Since: 12 Feb 2016 Location: Shropshire Posts: 1110	I like that, wish I could trust myself with wiring anything, my 90 would like spontaneously combust if I did it  1993 200 Tdi 90 CSW 1956 Series 1 Hard-top 1958 Series 1 Soft-top
10th Nov 2017 12:11pm

mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6772	Tiger wrote: Nearly a month and no updates? (sorry make that 2!!) Yeah I've been a bit busy with other things so not had a chance to do anything to it  Ray My build thread http://www.defender2.net/forum/topic17615.html
10th Nov 2017 7:39pm

mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6772	Kit wrote: I like that, wish I could trust myself with wiring anything, my 90 would like spontaneously combust if I did it The wiring kit came with the leccy Windows so all I had to do was extend a few of them to reach the doors, it not that hard I'm sure you could do it  Ray My build thread http://www.defender2.net/forum/topic17615.html
10th Nov 2017 7:41pm

mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6772

Update just for Tiger Finally started fitting the wiring for the heated screen and mirrors today Click image to enlarge Doesn't look much but with tidying up a few previously run wires under the dash and adding wires for the mirrors it took me a good few hours Click image to enlarge Click image to enlarge All the heated screen wiring is in and the dash back together but I'll have to connect the mirrors up tomorrow as I've run out of light and while the door trims are off I'll fix the central locking broken wire for the drivers door. Are defenders ever finished? Ray My build thread http://www.defender2.net/forum/topic17615.html

15th Nov 2017 5:04pm

GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10384	Answering your question Ray: no.  QRZ 2e0vpf
15th Nov 2017 6:31pm

mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6772	it's like painting the forth bridge  Ray My build thread http://www.defender2.net/forum/topic17615.html
15th Nov 2017 7:06pm

Page 47 of 81 < 1 2 3 ... 46 47 48 ... 79 80 81 >

All times are GMT + 1 Hour Jump to  Select a forum General Technical Maintenance & Modifications In Car Electronics Wheels & Tyres Tdi V8 Td5 Puma (Tdci) 130 BMW Engine Conversions Defender Celebration Series & Classic Works Series Land Rovers My Defender Spotted Events Pictures & Video Expedition & Overland Camping, Caravanning and Holidays Land Rover Customer Relations General & Technical (L663) Orders 2021MY (L663) Orders 2022MY (L663) Orders 2023/24MY (L663) Orders 2025MY Faults & Fixes (L663) Wheels & Tyres (L663) In Car Electronics (L663) My New Defender (L663) Modifications & Maintenance (L663) P400e Area (L663) V8 P525 Area (L663) Pictures & Video (L663) INEOS Grenadier Europe Australia & New Zealand Africa North America & Canada For Sale & Wanted For Sale & Wanted (L663) eBay & Bargain Spots Group Buys Dealership & Sponsor Feedback Finance & Insurance Stolen A-Plan Insurance Advanced Factors CSK Land Rovers Duckworth Parts Empire Tuning Other Site Sponsors Site News & Feedback Off Topic

<  Previous Topic | Next Topic >

Posting Rules You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum

Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis