![]() | Home > My Defender > Rear ended in my Defender - The Rebuild |
![]() ![]() |
|
|
Brewstop Member Since: 28 Oct 2012 Location: South Oxfordshire Posts: 315 ![]() ![]() ![]() |
![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge Sandy Last edited by Brewstop on 27th Feb 2016 3:31pm. Edited 1 time in total |
||
![]() |
|
Brewstop Member Since: 28 Oct 2012 Location: South Oxfordshire Posts: 315 ![]() ![]() ![]() |
![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge Sandy Last edited by Brewstop on 27th Feb 2016 3:36pm. Edited 3 times in total |
||
![]() |
|
Brewstop Member Since: 28 Oct 2012 Location: South Oxfordshire Posts: 315 ![]() ![]() ![]() |
![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge Sandy Last edited by Brewstop on 27th Feb 2016 3:30pm. Edited 1 time in total |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6341 ![]() ![]() ![]() |
![]() thank's for this photo .... its just reminded me where I wanted to stick some dum dum !! :thumbsup: Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated ![]() Last edited by Caterham on 20th Feb 2016 10:51am. Edited 1 time in total |
||
![]() |
|
Brewstop Member Since: 28 Oct 2012 Location: South Oxfordshire Posts: 315 ![]() ![]() ![]() |
Fitting a Safari Equip Single Pivot Wheel Carrier sourced from Brendan today, pics to follow.
http://www.4x4overlander.com/product/singl...ti-height/ Sandy |
||
![]() |
|
Brewstop Member Since: 28 Oct 2012 Location: South Oxfordshire Posts: 315 ![]() ![]() ![]() |
Safari Equip Single Pivot Wheel carrier out of the box:-
![]() Click image to enlarge Cleaning up the existing washers, decided to fit stainless fixings..... ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge Fitting the back plate ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge Sandy |
||
![]() |
|
Cuthbert Member Since: 26 Oct 2013 Location: Up North Posts: 1535 ![]() |
That looks a really careful and considered rebuild - it's looking good!
|
||
![]() |
|
Brewstop Member Since: 28 Oct 2012 Location: South Oxfordshire Posts: 315 ![]() ![]() ![]() |
Thanks for all the positive comments guys!
Single pivot wheel carrier fitted to my 5mm crossmember with captive plates inside and studs facing out to allow for removal or fitting a bumperette further down the line. Installation was made difficult by having a 45 ltd auxiliary fuel tank fitted. The schrader valve you can see hanging below is for the rear spring assister airbags http://www.air-lift.co.uk/product.php?unique_id=335 ![]() Click image to enlarge Nice access to the door handle and a good stand off distance. ![]() Click image to enlarge Spare 255/85/16 tyre and wheel in the high position, might be a little high for me and it obstructs the centre high level brake light. Overall, i'm happy with the bombproof construction and set up though. ![]() Click image to enlarge Sandy |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
