 | Home > Puma (Tdci) > Ultra gauge installation |
 
|
|
|
| redzob Member Since: 16 Jul 2014 Location: St. Peter Port Posts: 137   
|
There's one on ebay today for 2.4/2.2 tdci for. £59....
 Defender Puma 2.2 XS 90
Vespa GTS 300 Way too many racing bikes. |
||
28th Sep 2014 5:52pm |
|
| mark_d Member Since: 07 Sep 2013 Location: Northern Ireland Posts: 266 
|
Already seen that
 - hoping it doesn't get bid on. It would be better if I could get one that's damaged for cheaper as I only need the inner plastic support. I'm sure the re-mappers must have messed one or two up during development http://defender90xs.blogspot.co.uk/ |
||
|
28th Sep 2014 6:26pm |
|
| mark_d Member Since: 07 Sep 2013 Location: Northern Ireland Posts: 266
|
Redzob, I should say that there appears to be 2 LEDs in that blank for the DPF, not much of a problem for the 2.4 but for the 2.2 I'm not sure how wise it would be to cover them with a screen. If you were desperate, I could look into relocating the LEDs. http://defender90xs.blogspot.co.uk/
|
||
|
28th Sep 2014 6:33pm |
|
| noworries4x4 Member Since: 24 Dec 2010 Location: Newton Abbot Devon Posts: 1195 
|
I have got an ultra gauge ready to go where do I send it ?? sounds an excellent idea you might end up a uk dealer for them. If everything is under control you are not going fast enough.
Every Day 16 MY Discovery 4 Commercial Workshop and Escort Vehicle Weekends 07MY L322 TDV8 Vogue SE Series 1 80" 3ltr 6cyl with overdrive No Worries 4X4 |
||
|
28th Sep 2014 7:27pm |
|
| redzob Member Since: 16 Jul 2014 Location: St. Peter Port Posts: 137
|
let me have a check in the morning and revert. Thanks for looking into this though - interesting... Defender Puma 2.2 XS 90
Vespa GTS 300 Way too many racing bikes. |
||
|
28th Sep 2014 7:54pm |
|
| landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5945 
|
Yep. I'm in. Who wants what.
Great plan. Andy |
||
|
28th Sep 2014 8:14pm |
|
| mark_d Member Since: 07 Sep 2013 Location: Northern Ireland Posts: 266
|
Hi Russ,
Relocation of the switches is done in a similar way to the Check Temp, but with solder rather than pins. I need to decide on a switch location and source some switches before I write it up. http://defender90xs.blogspot.co.uk/ |
||
|
29th Sep 2014 10:28am |
|
| BigRuss Member Since: 15 May 2010 Location: Norfolk Posts: 2785  
|
I await your write up then sir Russell
2011MY 110 XS USW Black |
||
|
29th Sep 2014 10:41am |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 
|
Green film the front of the UG would finish it off nicely
|
||
|
29th Sep 2014 2:44pm |
|
| mark_d Member Since: 07 Sep 2013 Location: Northern Ireland Posts: 266
|
I have some, but the colour shade isn't right. I've a lighter shade ordered which will hopefully be here tomorrow
 http://defender90xs.blogspot.co.uk/ |
||
|
29th Sep 2014 3:50pm |
|
| DarrenJ Member Since: 07 May 2012 Location: North Beds Posts: 312 
|
Fantastic mod, looks factory fit
Land rover take note! Darren |
||
|
29th Sep 2014 7:18pm |
|
| bear100 Member Since: 22 Mar 2010 Location: South Wales Posts: 2013 
|
Count me in
2023 Defender L663 V8
2016 Range Rover Autobiography 4.4 TDV8 (gone) 2010 110 XS Utility 2.4TDCI 2010 Range Rover Sport TDV8 (gone) 2007 Discovery HSE TDV6 (gone) 1993 110 csw 200 tdi (gone) 1994 90 HT 300 tdi (gone) 1994 discovery 300tdi (gone) 90 hybrid 3.5 v8 (gone) Range rover bobtail 3.5 v8 (gone) |
||
|
29th Sep 2014 7:30pm |
|
| redzob Member Since: 16 Jul 2014 Location: St. Peter Port Posts: 137
|
Those 2 LEDs....
Been thinking about this today - is there anyone else looking at modding a 2.2, or are you all 2.4s? Defender Puma 2.2 XS 90 Vespa GTS 300 Way too many racing bikes. |
||
|
29th Sep 2014 7:59pm |
|
| landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5945
|
2.4 for me
|
||
|
29th Sep 2014 8:13pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
