DEFENDER2.NET - View topic - Fitting rear seat in Puma 90 hard top

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Fitting rear seat in Puma 90 hard top

Page 2 of 2

Print this entire topic ·

Dave-H

Member Since: 08 Feb 2011
Location: Surrey
Posts: 1507

2007 Defender 90 Puma 2.4 HT Tonga Green

Standard centre seat won't fit ... doesn't clear the transfer box lever on Puma's

Guns and Landrovers .... anything else is irrelevant.

24th Dec 2012 10:43am

rosscomax

Member Since: 07 Nov 2010
Location: Fochabers
Posts: 12

2007 Defender 90 Puma 2.4 HT Cairns Blue

Hi,
I fitted a pair of seats out of a disco4 (the two extra rear seats) without to much mods.
They came in the original sub frame, some modification was required to fit these.
I first made a sub frame out of 35mm x 35mm angle to fit between the wheel arches then adjusted the disco4 sub frame to suit and welded to the new base, this fits perfectly between the defenders wheel arches, I then bolted this through the sides of the wheel arches and fitted doubler plates to strengthen.
Two defender seatbelts and front top belt supports were then fitted and they fit the disco4 stalks.
When the seats are in the upright position they are about 600mm from the rear door so wife's shopping fits fine, when folded flat they sit flush with the tops of the wheel arches giving a nice large flat load area and some storage space underneath for bits and bobs.
Drop me an email if you need any pictures and I will send you more detail.
I will be away untill the 28th (at work) but will be able to send you info after then.

24th Dec 2012 11:50am

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

Now that sounds like a perfect idea! I'm off to search for d4 seats

24th Dec 2012 2:16pm

rosscomax

Member Since: 07 Nov 2010
Location: Fochabers
Posts: 12

Dave-H wrote:
Standard centre seat won't fit ... doesn't clear the transfer box lever on Puma's

Hi, I managed to fit one no problem, I fitted 10mm spacers between the rails and the seat box (front only) then shortned the transfer box linkage, I am sure this was not ot much problem, think I only had to adjust the rod end on the linkage.

24th Dec 2012 4:19pm

SGH

Member Since: 27 Sep 2010
Location: Hellingly-Sussex
Posts: 1527

rosscomax wrote:
Dave-H wrote:
Standard centre seat won't fit ... doesn't clear the transfer box lever on Puma's

Hi, I managed to fit one no problem, I fitted 10mm spacers between the rails and the seat box (front only) then shortned the transfer box linkage, I am sure this was not ot much problem, think I only had to adjust the rod end on the linkage.

Picture would be good please..

24th Dec 2012 4:22pm

rosscomax

Member Since: 07 Nov 2010
Location: Fochabers
Posts: 12

SGH wrote:
rosscomax wrote:
Dave-H wrote:
Standard centre seat won't fit ... doesn't clear the transfer box lever on Puma's

Hi, I managed to fit one no problem, I fitted 10mm spacers between the rails and the seat box (front only) then shortned the transfer box linkage, I am sure this was not ot much problem, think I only had to adjust the rod end on the linkage.

Picture would be good please..

I have taken it out, and removed the bulkhead now I have rear seats (fitted a bulkhead removal bar)
To allow kids access from front. I will have a look through my pics on my home PC. when I get back on dry land (stuck offshore for Xmas) on see if there is any pics, failing that I will do a quick drawing of where to fit the spacers and how to adjust linkage.
Remove your center tray and when you are in there remove the trans. cover from the seat box, this allows access to the linkage, I am sure I just removed the plastic ball joint and adjusted it down the rod about 10mm.
Think I used longer M6 bolts on front mounting points and made up spacers with M6 penny washers, about 10mm should do.
Best way to learn, just take it apart and get torn in!

24th Dec 2012 5:37pm

Likeomg

Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2626

2010 Defender 90 Puma 2.4 HT Stornoway Grey

before starting a new topic, is there any photos of these seats in the back of a 90? would really like to fit them to mine, will have the financials at the end of the month to get them...

17th Oct 2013 8:36pm

rosscomax

Member Since: 07 Nov 2010
Location: Fochabers
Posts: 12

Hi,
posted this on youtube.:

17th Oct 2013 8:59pm

Likeomg

Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2626

going to purchase some next month and give it a blast not going to alter the arches and going to use puma forward facing seats..

20th Oct 2013 3:58pm

Page 2 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum