 | Home > My Defender > im now part of the puma crew :D |
 
|
|
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478   
|
Took all the matting out this evening along with removing seats trays and necessary bolts etc ready to sound proof the front
( Thanks SGH for fast delivery on the dynamat and tape  ) I started to lay down and stick the top of the seat box and then it got dark so will carry on tommorow so far its gone on really nicely . As i get to the floor im going to remove the rubber insulation matting around the bulkhead and soundproof and seal up there so its leak free aswell  More photos to come tommorow
 Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge CSK Automotive www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
25th Jan 2013 6:34pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478
|
They run nicely under the cubby, under the carpet and up the dash
 CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
25th Jan 2013 6:53pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20912
|
Do you know how long they are? At some point mine might be up for sale (the RCA's) as I need some 90 Degree versions really.
Like this at the moment as you can see it isn't quite as I'd like. Click image to enlarge Gold plated & double shielded IIRC. _\Hennessey|Venom| F5/___ ___\⭐️Lone|Star|State/___ ____\We|Will|Win/___ ____/🇬🇧🇺🇸\____ _//*⛽️🛢️⚙️🧰*\\_ |
||
|
25th Jan 2013 6:59pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478
|
i dont mate no
 they were quite long and had quite a bit of excess behind the dash see what you mean with yours 90 degree ones would look a lot better mate CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
25th Jan 2013 8:02pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20912
|
Yep, I'd get the same one's as their great but just with 90 deg plugs on instead. It doesn't look right as it is IMHO. Also not got if the got knocked by accident.
On a different note. Good job with the Dynamatting. _\Hennessey|Venom| F5/___
___\⭐️Lone|Star|State/___ ____\We|Will|Win/___ ____/🇬🇧🇺🇸\____ _//*⛽️🛢️⚙️🧰*\\_ |
||
|
25th Jan 2013 8:16pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478
|
cheers mate it should come along nicely in the front now CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
25th Jan 2013 9:33pm |
|
| SGH Member Since: 27 Sep 2010 Location: Hellingly-Sussex Posts: 1527
|
I was planning on Dynamating my 130 but thought of doing underside of seat box. Chis is the rubber matting on seat box stuck on ?
Simon |
||
|
25th Jan 2013 9:39pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478
|
No its not Simon, just pull out the two little clips on both ends of the seat box and then pull it out mate Im putting genuine carpet in it after its all sound proofed and that stuff is stuck in CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
25th Jan 2013 9:44pm |
|
| SGH Member Since: 27 Sep 2010 Location: Hellingly-Sussex Posts: 1527
|
I am planning on stripping out my 130 and doing full Dynamat treatment when it gets a bit warmer  |
||
|
25th Jan 2013 9:47pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478
|
yer sod being out there at the minute i started and was glad to get the heat gun out to warm the dynamat up and my hands
 I will be getting another box or two from you soon to complete the rest of the landy mate, plan to do the sides in the rear and also the roof, still i might just have enough CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
25th Jan 2013 9:52pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478
|
More sound proofing
 i was pretty tight on measuring it all out which was good as i still have about 7 sheets left which means tommorow i can soundproof the side panels and the rear panels and what ever is left over can begin to fill the roof  I didnt take the bulkhead matting out completly as its behind the dash but i undone the neccessary screws which allowed me to lift it up and out to get the soundproofing in there. Then as it got dark i managed to put the majority back together including the carpet. I still need to fit the cubby and seats in and give it a hoover. Then on with more soundproofing
Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge CSK Automotive www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
26th Jan 2013 7:39pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20912
|
So is the Navi power lead in yet? _\Hennessey|Venom| F5/___
___\⭐️Lone|Star|State/___ ____\We|Will|Win/___ ____/🇬🇧🇺🇸\____ _//*⛽️🛢️⚙️🧰*\\_ |
||
|
26th Jan 2013 7:43pm |
|
| Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478
|
not yet  will be tommorow hopefully CSK Automotive
www.cskautomotive.co.uk Like us on Facebook - www.facebook.com/csklr Follow us on Instagram - @cskautomotive |
||
|
26th Jan 2013 7:45pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20912
|
Yeah yeah, And then it'll be May before you've done it and it still won't be done. I know what your like.
_\Hennessey|Venom| F5/___
___\⭐️Lone|Star|State/___ ____\We|Will|Win/___ ____/🇬🇧🇺🇸\____ _//*⛽️🛢️⚙️🧰*\\_ |
||
|
26th Jan 2013 7:47pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
