↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > wipac crystal install
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
tatra805



Member Since: 16 Aug 2011
Location: Dolany
Posts: 436
Slovakia 2008 Defender 110 Puma 2.4 CSW Bonatti Grey
wipac crystal install
Never enough light, so decided to try out these new headlights.



35£ are never going to buy you something close to optical quality or crystal clear.

So indeed the mirror coating has several dirt particles in it, its all plastics and polycarbonate (is it??)






BUT

a 30min swap gives you a another big step forward in light output. I was quite satisfied with the Osram night breakers, and i am convinced they are 75% of the overall improvement but the extra 25% you get with these wipacs is well worth it.

So not a top quality product but worth their price.

Light pattern is more evenly spread which is nice although my digital camera did not measure less output from the quadoptics.




did not connect the parking lights as i'm afraid it will ruin the original defender look.

like the facelift

:)

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Mr. Green
Post #150539 15th Jun 2012 9:14pm
View user's profile Send private message View poster's gallery Reply with quote
GREENI



Member Since: 22 Aug 2010
Location: staffs
Posts: 10384
United Kingdom 
Tidy. It's amazing how the old lights look so 'old hat' already.

Good call on the little spots too Thumbs Up QRZ 2e0vpf
Post #150542 15th Jun 2012 9:29pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20919
United Kingdom 
I have them too. On looks alone they look better and output is better also. Although I have the PHillips extreme bulbs Thumbs Up ____\We|Will|Win/___
____/πŸ‡¬πŸ‡§πŸ‡ΊπŸ‡Έ\____
_//*β›½οΈπŸ›’οΈβš™οΈπŸ§°*\\_
Post #150543 15th Jun 2012 9:29pm
View user's profile Send private message View poster's gallery Reply with quote
Maxxed_Ross



Member Since: 06 Jun 2012
Location: Bathgate / North Sea
Posts: 340
Scotland 2001 Defender 90 Td5 CSW Cobar Blue
Got a set of these myself to fit in the coming week, my last defender had them too and I agree with all the points above... apart from the quality. Both of mine are flawless Very Happy
Post #150549 15th Jun 2012 10:15pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20919
United Kingdom 
Maxxed_Ross wrote:
Got a set of these myself to fit in the coming week, my last defender had them too and I agree with all the points above... apart from the quality. Both of mine are flawless Very Happy

Likewise mine were too. It's well worth fitting the stainless bezels at the same time Thumbs Up ____\We|Will|Win/___
____/πŸ‡¬πŸ‡§πŸ‡ΊπŸ‡Έ\____
_//*β›½οΈπŸ›’οΈβš™οΈπŸ§°*\\_
Post #150550 15th Jun 2012 10:17pm
View user's profile Send private message View poster's gallery Reply with quote
Maxxed_Ross



Member Since: 06 Jun 2012
Location: Bathgate / North Sea
Posts: 340
Scotland 2001 Defender 90 Td5 CSW Cobar Blue
Indeed, mine were totally gone so that the surround was the only thing holding the light in Laughing
Post #150555 15th Jun 2012 10:27pm
View user's profile Send private message View poster's gallery Reply with quote
Maxxed_Ross



Member Since: 06 Jun 2012
Location: Bathgate / North Sea
Posts: 340
Scotland 2001 Defender 90 Td5 CSW Cobar Blue
Indeed, mine were totally gone so that the surround was the only thing holding the light in Laughing
Post #150556 15th Jun 2012 10:27pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20919
United Kingdom 
Maxxed_Ross wrote:
Indeed, mine were totally gone so that the surround was the only thing holding the light in Laughing

Same for me too. Only gripe is there is no stainless screws but then again I wouldn't fancy trying to bodge the lighting alignment putting it back and then it becomes a big hassle getting it properly done. Why the hell don't LR either paint the things properly in the first place or use stainless even if it's painted over. Afterall the Genuine crap LR ones cost almost the same anyway Rolling Eyes ____\We|Will|Win/___
____/πŸ‡¬πŸ‡§πŸ‡ΊπŸ‡Έ\____
_//*β›½οΈπŸ›’οΈβš™οΈπŸ§°*\\_
Post #150559 15th Jun 2012 10:36pm
View user's profile Send private message View poster's gallery Reply with quote
bpman



Member Since: 21 May 2008
Location: Oslo
Posts: 8069
2008 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black
custom90steve wrote:
Maxxed_Ross wrote:
Indeed, mine were totally gone so that the surround was the only thing holding the light in Laughing

Same for me too. Only gripe is there is no stainless screws but then again I wouldn't fancy trying to bodge the lighting alignment putting it back and then it becomes a big hassle getting it properly done. Why the hell don't LR either paint the things properly in the first place or use stainless even if it's painted over. Afterall the Genuine crap LR ones cost almost the same anyway Rolling Eyes


It's not to difficult, drive up to a wall mark with chalk the Top of the light beams, change lights and the reallign the lights against the chalk marks
Post #150578 16th Jun 2012 5:35am
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20919
United Kingdom 
bpman wrote:
custom90steve wrote:
Maxxed_Ross wrote:
Indeed, mine were totally gone so that the surround was the only thing holding the light in Laughing

Same for me too. Only gripe is there is no stainless screws but then again I wouldn't fancy trying to bodge the lighting alignment putting it back and then it becomes a big hassle getting it properly done. Why the hell don't LR either paint the things properly in the first place or use stainless even if it's painted over. Afterall the Genuine crap LR ones cost almost the same anyway Rolling Eyes


It's not to difficult, drive up to a wall mark with chalk the Top of the light beams, change lights and the reallign the lights against the chalk marks

If one could be bothered Whistle Laughing Is there such things as stainless screw kits for the lights? ____\We|Will|Win/___
____/πŸ‡¬πŸ‡§πŸ‡ΊπŸ‡Έ\____
_//*β›½οΈπŸ›’οΈβš™οΈπŸ§°*\\_
Post #150597 16th Jun 2012 10:35am
View user's profile Send private message View poster's gallery Reply with quote
taffrican



Member Since: 14 Jan 2011
Location: Living room
Posts: 625
Wales 2002 Defender 90 Td5 HT Java Black
I just ordered a pair of these
http://www.powerfuluk.com/products/landrov...r-%29.html
anyone got any experience with them?
Post #151332 20th Jun 2012 12:38pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
twopoint6khz



Member Since: 18 Aug 2011
Location: North Lakes
Posts: 655
United Kingdom 2005 Defender 110 Td5 CSW Java Black
It says at the bottom that they also fit the Austin A40 and the Ford Consul. I'd love to see that....

Also confused as to how they are 'not E-marked' but are 'MOT-passing lights'? Does that just mean the tester won't notice?
Post #151335 20th Jun 2012 12:46pm
View user's profile Send private message View poster's gallery Reply with quote
K9F



Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610
United Kingdom 2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey
Rolling with laughter Must buy some for my Wolsely Hornet! Quality advertising, quality product! Whistle

twopoint6khz wrote:
Also confused as to how they are 'not E-marked' but are 'MOT-passing lights'? Does that just mean the tester won't notice?


Think they're relying on the fact the tester will be dumbstruck by the quality of these lights and subsequently blinded by the crystal clarity the reflectors give to the high powered LEDs that can be seen from space on a cloudy day and singe your retinas at over a km away.

Laughing If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!
Post #151339 20th Jun 2012 12:57pm
View user's profile Send private message View poster's gallery Reply with quote
taffrican



Member Since: 14 Jan 2011
Location: Living room
Posts: 625
Wales 2002 Defender 90 Td5 HT Java Black
So what are you guys saying? what have these guys got to gain by saying they will fit the cars listed when they wouldn't?, these lights are the same as the "highly acclaimed" wipac crystals.

Last edited by taffrican on 21st Jun 2012 8:07am. Edited 2 times in total
Post #151398 20th Jun 2012 6:36pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
IKke



Member Since: 16 Aug 2008
Location: Brabant
Posts: 117
Netherlands 1986 Defender 90 200 Tdi SW Keswick Green
Also bought these lights and installed them yesterday. They are to small to fit and rattle around in the fitting ring... they are hold in by the edge of ring. Confused

Landy is a 1986 military one

EDIT: they are the LHD version, the wipac ones Scaling the real deal.
Post #151399 20th Jun 2012 6:41pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums