↓ Advertise on Defender2 ↓

Home > Camping, Caravanning and Holidays > First outing in our basic conversion
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
whitepeakwolf



Member Since: 03 Feb 2021
Location: Peak District
Posts: 33
England 
First outing in our basic conversion
Bit the bullet & removed all the rear stuff in the SW to build a rudimentary camper - worked remarkably well !
Flooring is a 10mm stable mat cut down from 8’ x 4’ (unbelievably heavy Shocked )
Boarding is 12mm birch phenolic ply off cuts from a minibus convertor
Insulation is 10mm foil backed self adhesive closed cell foam
Frame is 3” x 2”
Futons (x2) we’re from Argos years ago
Window blinds came from marketplace as at the time couldn’t buy new ones anywhere but these were great !
Tent awning is a Vango Cove 111 Air with air beams - a great piece of kit with driveaway function. Had a bit of an issue attaching to the truck but more operator error than anything . . .

We used it for two nights at a music festival & that’s probably what we’ll use it for mainly. It’s my daily driver however so the bed frame is stowed elsewhere so I can get the dog in.

Great fun & inexpensive too Thumbs Up

Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge
Post #1071540 16th Jul 2025 4:58am
View user's profile Send private message View poster's gallery Reply with quote
Landymatt



Member Since: 31 Dec 2018
Location: York
Posts: 204
United Kingdom 
Excellent! Looks great fun.

Do the screws in those T-shaped brackets on your bed structure go right through the wood to a corresponding bracket? What are they called? Cheers!
Post #1071545 16th Jul 2025 6:53am
View user's profile Send private message View poster's gallery Reply with quote
whitepeakwolf



Member Since: 03 Feb 2021
Location: Peak District
Posts: 33
England 
Very Happy Cheers
No - the brackets are just on the one face albeit against my usual approach of over complicating things . . . . Rolling Eyes
They were from the hardware section at B&Q
The frame is snug against the wheel boxes so there’s no movement at all & it’s super strong.
Post #1071549 16th Jul 2025 8:55am
View user's profile Send private message View poster's gallery Reply with quote
Bowbearer



Member Since: 12 Aug 2022
Location: Norfolk
Posts: 221
United Kingdom 1985 Defender 110 200 Tdi SW Auto Baltic Blue
shows keep it simple works.

Enjoy.
Post #1071553 16th Jul 2025 9:55am
View user's profile Send private message View poster's gallery Reply with quote
wyvern



Member Since: 14 Dec 2009
Location: Cornwall
Posts: 2148
United Kingdom 2012 Defender 110 Puma 2.2 XS CSW Firenze Red
Careful ! this is very similar to how we converted our first 110 in the 80’s... things can get expensive !! Rolling with laughter

We used that for several tours around the UK, but then went onto more complex conversion with a water tank and pump etc., which also worked well before version 3 which was fitting reclining seats, cooker/sink units and a wardrobe as part of a doormobile conversion - that worked well and was used in 2 110’s till we moved to version 4 - which is the current pop top conversion ...

Its a Rabbit hole and once you start these conversions you are always looking to improve them some how ...
Well done for how you have converted so far! looks great

Thumbs Up Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html
Elgar -TDCI(Puma) 110XS Dormobile - now sold
Devon & Cornwall 4x4 Response - DC126
Post #1071556 16th Jul 2025 10:26am
View user's profile Send private message View poster's gallery Reply with quote
whitepeakwolf



Member Since: 03 Feb 2021
Location: Peak District
Posts: 33
England 
Bowbearer wrote:
shows keep it simple works.

Enjoy.


That’s the plan ! Very Happy
Post #1071664 18th Jul 2025 8:28am
View user's profile Send private message View poster's gallery Reply with quote
whitepeakwolf



Member Since: 03 Feb 2021
Location: Peak District
Posts: 33
England 
wyvern wrote:
Careful ! this is very similar to how we converted our first 110 in the 80’s... things can get expensive !! Rolling with laughter

We used that for several tours around the UK, but then went onto more complex conversion with a water tank and pump etc., which also worked well before version 3 which was fitting reclining seats, cooker/sink units and a wardrobe as part of a doormobile conversion - that worked well and was used in 2 110’s till we moved to version 4 - which is the current pop top conversion ...

Its a Rabbit hole and once you start these conversions you are always looking to improve them some how ...
Well done for how you have converted so far! looks great

Thumbs Up


It’s doing what we want it to do - for now Very Happy
Post #1071665 18th Jul 2025 8:29am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums