![]() | Home > Technical > Doors- Supplier DDS Metal Services |
![]() ![]() |
|
|
Oldowner Member Since: 26 Dec 2018 Location: South west Posts: 670 ![]() ![]() ![]() |
I wouldn’t fit anything other than “Puma” doors, far better made than the old fabricated type
|
||
![]() |
|
300TDi CSW Phil Member Since: 03 Apr 2016 Location: Bracknell Posts: 781 ![]() ![]() ![]() |
Puma doors aren't happening as that requires loads of new bits on top of the cost of the doors.
I have managed to convince the existing 1995 ones to eek out (badly in places I admit) till now so I am fairly confident that Galv frame replacements will be fine and I can reuse the internals. 1995 300 Tdi Epsom Green - It's a keeper. Wide Track Sankey- In bits- Gone to a new home M0XQS |
||
![]() |
|
Shroppy Member Since: 25 Feb 2016 Location: Shropshire Posts: 878 ![]() ![]() ![]() |
I have always found DDS to be very good and also very accommodating. I went to their site to inspect various bits before placing an order for a bulkhead, and they have knocked up a pair of custom sills for me before now. I have no experience of their doors though.... 1985 127 V8 Build Thread
Series 2 109" Series 1 80" |
||
![]() |
|
Screbble Member Since: 26 Apr 2015 Location: Lancashire Posts: 2270 ![]() ![]() ![]() |
DDS have a great reputation.
I used SP and chose to visit them and ‘hand pick’ my doors from their stock. They are better to deal with in person, although that isn’t necessarily practical for many. |
||
![]() |
|
300TDi CSW Phil Member Since: 03 Apr 2016 Location: Bracknell Posts: 781 ![]() ![]() ![]() |
Thanks @Screbble
DDS are driveable from me SP not so much. I think I have made up my mind and a complete repaint is on the cards ![]() Wide Track Sankey- In bits- Gone to a new home M0XQS |
||
![]() |
|
Screbble Member Since: 26 Apr 2015 Location: Lancashire Posts: 2270 ![]() ![]() ![]() |
Sounds like a great decision - albeit expensive - but worth it.
Looking forward to the before and after pics 👍 |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
