 | Home > Modifications & Maintenance (L663) > Retrofit 11.4 Pivi Display |
 
|
|
|
| ThunderBob Member Since: 23 May 2024 Location: Kentucky Posts: 18  
|
@KeY-8
The display is just held by the four plastic clips. I have indeed removed it after installation; it requires a strong pull to to dislodge. You pull it straight out. Disconnecting the battery is always recommended, I did not disconnect my battery when I installed mine. However I did wear a wrist grounding strap when I unplugged the original display and when I plugged in the new display. Remember the screen powers up sometimes even when you haven’t pressed start button. I have not encountered the blank screen issue but be aware that you may encounter a blank screen if you change the CCF file before you access the hidden menu to change the internal configuration to 11.4  Click image to enlarge I don’t believe the recall would apply to the new display. Good luck! |
||
10th Mar 2025 12:02am |
|
| LostCause Member Since: 07 Jan 2025 Location: Toronto Posts: 11 
|
I’ve not had the blank screen issue either. That said there is an open recall requiring update at the dealership. The update is for “image processor A” I don’t believe this is inside the actual screen.
|
||
|
11th Mar 2025 2:56am |
|
| Fifth Horseman Member Since: 08 Mar 2011 Location: Lanarkshire Posts: 331  
|
The Image Processor Module A (IPMA) is the camera module mounted behind the rear view mirror which provides the lane keep assist and traffic sign recognition functions. Defender 110 D300 X-Dynamic HSE MY22
|
||
|
19th Mar 2025 8:23am |
|
| lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2991
|
l actually think the vehicle interior looks worse with the larger screen. The small screen looks like it's supposed to be there rather than stuck out in front as the larger screen is.
But that's only my opinion. I am obviously in the minority as most owners nowadays want the large media screen. At least there will be plenty of 10" screens on Ebay if mine ever fails! A bit like the steel wheels. Last edited by lightning on 19th Mar 2025 12:19pm. Edited 1 time in total |
||
|
19th Mar 2025 9:36am |
|
| ruben Member Since: 04 Feb 2021 Location: ASTURIAS Posts: 295 
|
No, you're not alone, I agree with that, I also think the 9" fits better with the environment and is less invasive, it looks better fitted and harmonious... the 11", and I'm not even mentioning the 13" ones, take on too much importance, everything else fades into the background and everything starts to look strange and too much like tuning and aftermarket style…all in a world where everything copies, at least until now, an unnameable American manufacturer with a copied name by the way... I only recognize a point of practicality in large screens because they actually look better... but for me it's not worth the effort, and I'm not convinced by the result, so I like my 9" as it is… And it's a shame, it would have been wonderful, and unique, if LR thought of a quick disconnection system and had made it portable... it would have been a total success!!! Defender 110 SE I6 D250 23MY
ExDiscovery 3 TDV6 SE |
||
|
19th Mar 2025 10:37am |
|
| Moo Member Since: 01 Oct 2021 Location: UK Posts: 1457 
|
Agree. I think the original screen just looked right. Never once did I think I needed a bigger screen when using it. Reminds me of those Ali Express add ons. Eiger Grey MY23 D250 SE with bits. Known as Noddy.
|
||
|
19th Mar 2025 2:33pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
