DEFENDER2.NET - View topic - Stock TD5 Aircon Improvement

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Stock TD5 Aircon Improvement

Page 2 of 2

Print this entire topic ·

Dr Phibes

Member Since: 24 Apr 2024
Location: Melbourne
Posts: 31

You mean you have the condenser and it abuts the frame? I haven’t got mine yet but think it should be fine mounted in any orientation as it is pressure fed.

The blower is apparently 223cfm, 3 speed. I haven’t got it yet but it doesn’t look like a perfect fit- will have to adapt. Also need to confirm if I need to replace control unit with another one - assume PWM.
https://www.sparesbox.com.au/products/oex-...ded-emx009

28th Nov 2024 9:47am

Zimblewinder

Member Since: 12 Jan 2019
Location: Geelong
Posts: 44

2000 Defender 130 2.5 TD HCPU Chawton White

Hi there, not sure how far along you are Dr but found this on Alibaba. Have a look at the first universal unit. It is exactly the same as the AMC kit used in Australia only with a different vent box riveted on the front(could remove and use the original vent set instead). For $260 for the lot it's a steal. There is also another unit in the pictures which has four outlets for plumbing which might also be a good setup for improved venting.

https://www.alibaba.com/product-detail/Uni...68595.html

29th Nov 2024 10:13pm

Dr Phibes

Member Since: 24 Apr 2024
Location: Melbourne
Posts: 31

I have the condenser and blower. I have confirmed the blower housing is oversize (marginally) and that the OEX motor will fit the original housing. I just need to get the old blower fans off and put on the shafts.

29th Nov 2024 11:45pm

Page 2 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum