![]() | Home > Puma (Tdci) > 110 standard height |
![]() ![]() |
|
|
BrickBox Member Since: 05 Oct 2021 Location: Wales Posts: 996 ![]() ![]() ![]() |
Do you have a picture to upload? 2008 2.4 110 Utility Station Wagon XS.
|
||
![]() |
|
TexasRover Member Since: 24 Nov 2022 Location: Paris Posts: 1278 ![]() ![]() ![]() |
This information is readily available online. Note however that there are different rear spring setup giving a different ride height aft for the 110 (commercial, pickup, Country SW)
Also you want to check your tire size, someone might have put on bigger ones. |
||
![]() |
|
Phillywilly72 Member Since: 29 Apr 2024 Location: Wiltshire Posts: 83 ![]() ![]() ![]() |
![]() Click image to enlarge Pics for ref ![]() Click image to enlarge |
||
![]() |
|
Harry.O Member Since: 25 Jul 2014 Location: Warwickshire Posts: 726 ![]() ![]() ![]() |
This might help: https://gwynlewis4x4.co.uk/fitting-instructions-tech-info/
There's a download called 'How to measure you suspension...' 2005 Td5 110 Hardtop 1989 300Tdi 90 Soft top 1992 200Tdi 90 Truck cab with Land Cruiser axles |
||
![]() |
|
Phillywilly72 Member Since: 29 Apr 2024 Location: Wiltshire Posts: 83 ![]() ![]() ![]() |
Brill cheers. I have read though that different 110 models have different set heights I guess due to weight differences of pickup, dcpu etc
Last edited by Phillywilly72 on 5th Jun 2024 1:31pm. Edited 1 time in total |
||
![]() |
|
MK Member Since: 28 Aug 2008 Location: Santiago Posts: 2477 ![]() ![]() ![]() |
https://www.defender2.net/forum/post708517.html Puma 110" SW
............................................................. Earth first. Other planets later |
||
![]() |
|
blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17830 ![]() ![]() ![]() |
The DCPU always has a bum-in-the-air stance due to having springing for a 1-tonne payload. It's a choppy ride when empty!
|
||
![]() |
|
Phillywilly72 Member Since: 29 Apr 2024 Location: Wiltshire Posts: 83 ![]() ![]() ![]() |
That makes sense. Is there any way of identifying if HD springs have been used? Like diameter of the coiled metal or more turns per height?
|
||
![]() |
|
Nidge Member Since: 27 Jan 2008 Location: Kildare Ireland Posts: 824 ![]() ![]() ![]() |
Springs are colour coded see below.
From your picture Looks standard height to me., ![]() Click image to enlarge |
||
![]() |
|
Mcrevilll Member Since: 09 Jan 2025 Location: NY Posts: 4 ![]() ![]() ![]() |
I took a cm ruler to double-check the spacing on mine and found it was just a few millimetres off too — turns out the holes weren’t aligned perfectly from the factory. Loosened everything, got it all square, then tightened bit by bit while checking with the cm ruler again. Much better fit now without forcing anything.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
