DEFENDER2.NET - View topic - Fault after enabling dynamic with G4

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > General & Technical (L663) > Fault after enabling dynamic with G4

Page 1 of 1

Print this entire topic ·

Looneyfitter

Member Since: 03 Mar 2024
Location: Liverpool
Posts: 30

Fault after enabling dynamic with G4

Hi can anyone tell me why I have a yellow i in a circle on the dash? I also had a fault come up saying start stop switch fault whilst uploading the ccf.

Lastly, using the terrain selector, I can't select the wavy road to apply dynamic settings?

Many thanks.

20th Apr 2024 7:39pm

Looneyfitter

Member Since: 03 Mar 2024
Location: Liverpool
Posts: 30

Click image to enlarge
These are the 3 changes I made. Cheers.

Click image to enlarge

20th Apr 2024 7:42pm

DefenderMidlands

Member Since: 08 Mar 2023
Location: West Midlands
Posts: 287

Dynamic Mode settings

EUCD-129 Terrain Response Fitment, Set to "Auto Terrain Response Dynamic & Configurable Dynamic Mode"

EUCD-245 Dynamic-I
Standard: Dynamic-i Not Fitted
Changed to: Dynamic-i Content with Configurable Dynamic Mode Screen

MultiCAN-562 DynamicProgMode
Standard: Not available for selection
Changed to: Available for selection without timeout
Other possible value: Available for selection with timeout

MultiCAN-605 ConfigDynamicMode
Standard: Not Fitted
Changed to: Fitted

MultiCAN-777 Ter Dyn Select In FCPB
Standard: Control interface not available in FCPB
Changed to: Rotary used for selection within touch screen

EUCD-129 Terrain Response Fitment, Set to "Auto Terrain Response Dynamic & Configurable Dynamic Mode" MY25 D350 Defender 110 X, Carpathian Grey, 7 Seat, Electric Towbar

20th Apr 2024 8:43pm

Looneyfitter

Member Since: 03 Mar 2024
Location: Liverpool
Posts: 30

Ah OK mate thanks. So there's more codes to address?

20th Apr 2024 9:23pm

DefenderMidlands

Member Since: 08 Mar 2023
Location: West Midlands
Posts: 287

I think you may of only half enabled it. Need to reboot pivi afterwards and lock and leave car to sleep 15mins min MY25 D350 Defender 110 X, Carpathian Grey, 7 Seat, Electric Towbar

20th Apr 2024 9:41pm

Defendit..

Member Since: 09 Aug 2020
Location: 's-Hertogenbosch
Posts: 475

I also set: Multican 682 DynamicLiteMode to Available for selection whitout timeout. No Mud flaps for my 90.!
-----------------------------------------
P300S MY21 Keswick Green on air, adv.+ offroad pack, DRL+fog, Dinamica Suedecloth + Ebony headliner/Cross Beam- Many Mods..

21st Apr 2024 7:36am

Looneyfitter

Member Since: 03 Mar 2024
Location: Liverpool
Posts: 30

OK so added the missing codes this morning. I can now select terrain response but I still have the i on the dash.

I had a message pop up on the screen saying start/stop button fault detected.

I have run fault finding and this is the only fault I have?

I did enable WiFi hot-spot too yesterday. Wondering if. It could be that?

Click image to enlarge

21st Apr 2024 9:35am

mmbanf

Member Since: 16 Mar 2021
Location: Milano
Posts: 185

hi, this error doesn't seem indicative of a problem on bcm,
Does the error remain even after the machine sleeps?
personally I would restore the original configuration, then possibly try to make one change at a time.

Marco

Click image to enlarge

21st Apr 2024 7:32pm

Retroanaconda

Member Since: 04 Jan 2012
Location: Scotland
Posts: 2787

All the changes I have applied have taken several ignition and sleep cycles to start work properly and all have created error messages to begin with. I think it takes a day or two for all the ECUs to learn the new CCF and before that happens it can generate errors.

21st Apr 2024 7:42pm

Looneyfitter

Member Since: 03 Mar 2024
Location: Liverpool
Posts: 30

Thanks for the input guys. All is OK now. After a few resets it went away. The i with a circle was because I was low on fuel lol

21st Apr 2024 9:00pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum