↓ Advertise on Defender2 ↓

Home > My Defender > M57 swap into the Red Baron
Post Reply  Down to end
Page 5 of 6 <123456>
Print this entire topic · 
Mj_pilot



Member Since: 24 Oct 2023
Location: Oz
Posts: 10
 2011 Defender 110 Other SW Auto Indus Silver
Tensioner as per attached and pulley is 64mm diameter from e90 part number

INA-5320553100 BMW Drive Belt Idler Pulley - INA 11287790448 Purchased from fcp euro.



Click image to enlarge
carrotbay wrote:
Shane / MJ I’m swapping out the power steering pump and air con pump on my E70 engine for 330D parts. Please can you help with the idler under the alternator / next to the tensioner? I bought the part below, but I don’t think it’s right as I think it needs to bolt through the alternator lower mount and the one supplied doesn’t. Do you have the part number you used?



Click image to enlarge


Click image to enlarge



Mj_pilot wrote:

Click image to enlarge
carrotbay wrote:
Shane, this thread has been so useful! I’m currently working on putting a M57N2 from a 2009 X5 E70 in to my 110, and was deliberating over the Blackbird P38 conversion or fitting aircon compressor and steering pump from an E90 - you’ve confirmed that’s the way to go!

(If I’d read this before buying a X5 as a donor then maybe I’d just have looked for a E90 330D instead!)

Do you have any photos of the turbo actuator rotated and the bracket? Does it clear the steering box now?
Post #1025784 24th Feb 2024 7:42am
View user's profile Send private message View poster's gallery Reply with quote
Mj_pilot



Member Since: 24 Oct 2023
Location: Oz
Posts: 10
 2011 Defender 110 Other SW Auto Indus Silver
Magic - thankyou.

I’m planning to take off for the transmission cooler but if I ditch that idea I’ll take your advice on board. Cheers.

[quote="shanecl"]
Mj_pilot wrote:

Click image to enlarge

MJ see your pipe for the bottom radiator, the E53 X5 bottom pipe fits straight on and its minus the EGR cooler pipe. can get it on ebay for feck all
Post #1025785 24th Feb 2024 7:46am
View user's profile Send private message View poster's gallery Reply with quote
Mo Murphy



Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2086
United Kingdom 1984 Defender 90 200 Tdi HT Pennine Grey
Progress Shane ! Good to see ! Are you suffering some mission creep with the axles ...
Mo The Land Rover 90 - Many are called, few are chosen.
Post #1025842 24th Feb 2024 5:34pm
View user's profile Send private message View poster's gallery Reply with quote
shanecl



Member Since: 20 Mar 2013
Location: Louth
Posts: 458
Ireland 1989 Defender 90 V8 Petrol CSW Auto Firenze Red
Mo, i am the biggest procrastinator and overthinker you will ever come across Laughing

Thanks Mo Very Happy

back on track, fitting fuel system tonight and got to get a lead for the PC so i can fill auto box and we should have some noise coming from it soon Very Happy
Post #1025999 26th Feb 2024 12:44pm
View user's profile Send private message View poster's gallery Reply with quote
shanecl



Member Since: 20 Mar 2013
Location: Louth
Posts: 458
Ireland 1989 Defender 90 V8 Petrol CSW Auto Firenze Red
[quote="Mj_pilot"]Magic - thankyou.

I’m planning to take off for the transmission cooler but if I ditch that idea I’ll take your advice on board. Cheers.

I was thinking of running a water cooler too for the trans but wasn't sure, pulled the trigger on a setrab so see how we go.

The E60 530d cooler i was looking at and easy money on ebay
Post #1026000 26th Feb 2024 12:46pm
View user's profile Send private message View poster's gallery Reply with quote
Mo Murphy



Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2086
United Kingdom 1984 Defender 90 200 Tdi HT Pennine Grey
shanecl wrote:
Mo, i am the biggest procrastinator and overthinker you will ever come across Laughing

Thanks Mo Very Happy

back on track, fitting fuel system tonight and got to get a lead for the PC so i can fill auto box and we should have some noise coming from it soon Very Happy


I'll look forward to progress then 👍
Mo The Land Rover 90 - Many are called, few are chosen.
Post #1026127 27th Feb 2024 11:44am
View user's profile Send private message View poster's gallery Reply with quote
tuddy70



Member Since: 28 Aug 2016
Location: West Yorkshire
Posts: 32
Awesome thread Thumbs Up I'm also in the process of doing this conversion, what are you doing handbrake wise? I've noticed one or two do away with the drum in favour of the park on the auto box but not sure about it.
Post #1026244 28th Feb 2024 12:06pm
View user's profile Send private message View poster's gallery Reply with quote
tuddy70



Member Since: 28 Aug 2016
Location: West Yorkshire
Posts: 32
carrotbay wrote:
Mj_pilot wrote:

Click image to enlarge
Carrotbay,

The turbo actuator on my install clears. It’s close but it clears. The plug housing touches the steering box but I may get away with it. Otherwise, just need to trim the housing a bit.


Thanks MJ - really useful
I got my engine in this week and I’m probably a few mm further forward as the actuator plug is very tight against the steering box. I’m going to space it back a little on it’s mounting bolts and that should do the trick.
Good to see the belts, just waiting for some bits to arrive and that should sort that. What are you doing for power steering hoses?


Hi Carrotbay, regarding the power steering hoses I read that off the shelf 200tdi are a direct fit so could be worth a look to save a few quid, Ive noticed people offering a conversion for double the price of these Shocked
Post #1026246 28th Feb 2024 12:09pm
View user's profile Send private message View poster's gallery Reply with quote
shanecl



Member Since: 20 Mar 2013
Location: Louth
Posts: 458
Ireland 1989 Defender 90 V8 Petrol CSW Auto Firenze Red
Sorry Carrotbay, i didnt see the last bit asking about the power steering hoses.

I got some hydraulic pipes made up. I'll take a picture and send you the size and lengths of the hoses. They are pretty short as the pump is right beside the box. I will do it this evening or Thursday Very Happy
Post #1026247 28th Feb 2024 12:20pm
View user's profile Send private message View poster's gallery Reply with quote
shanecl



Member Since: 20 Mar 2013
Location: Louth
Posts: 458
Ireland 1989 Defender 90 V8 Petrol CSW Auto Firenze Red
So this is what £200 pounds of air con fittings look like Big Cry



Click image to enlarge

I was struggling with the air con as they use a different type of fittings and trying to get my head around it. Finally have it cracked and plan is to machine a new block with threaded fittings that connects to the evaporator and then buy an Eaton hose kit and make the hoses myself, Heading to machine shop Thursday to see how much it'll be to machine the block and maybe make a couple
Post #1026250 28th Feb 2024 12:34pm
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 7701
2011 Defender 110 Puma 2.4 USW Stornoway Grey
i just bought a kit for ac hoses to replace pipes on my 2,4 with ac, m57n2 being fitted Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop
Post #1026265 28th Feb 2024 4:25pm
View user's profile Send private message View poster's gallery Reply with quote
shanecl



Member Since: 20 Mar 2013
Location: Louth
Posts: 458
Ireland 1989 Defender 90 V8 Petrol CSW Auto Firenze Red
Where did you get it jst

Shane
Post #1026345 29th Feb 2024 11:13am
View user's profile Send private message View poster's gallery Reply with quote
Linds Hanson



Member Since: 16 Jan 2021
Location: Cornwall
Posts: 443
United Kingdom 
I think Marcus does the evaporator adaptor
Post #1026351 29th Feb 2024 11:52am
View user's profile Send private message View poster's gallery Reply with quote
shanecl



Member Since: 20 Mar 2013
Location: Louth
Posts: 458
Ireland 1989 Defender 90 V8 Petrol CSW Auto Firenze Red
Thanks Linds,

I got the large compressor fitting and the condenser fitting off him.

Shane
Post #1026358 29th Feb 2024 1:03pm
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 7701
2011 Defender 110 Puma 2.4 USW Stornoway Grey
shanecl wrote:
Where did you get it jst

Shane


Marcus Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop
Post #1026366 29th Feb 2024 3:00pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 5 of 6 <123456>
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums