Member Since: 01 Feb 2015
Location: Florida Keys
Posts: 61
Clutch adjust MC pushrod
Click image to enlarge
Clutch pedal height adjusted, Pushrod giving me fits.
My pushrod has 2 nuts above where it enters top of pedal and a locknut below.
I cannot get the 2 nuts undone, which I need to in order to adjust to the 1.5mm free play. There is no space for an open end spanner to grab the nut closest to top of pedal assembly.
Is there a trick before I go buy a grinder to shave up a spanner to fit in there?
200Tdi, and I am following the manual.
Assistance appreciated.2013 110 - Keswick Green
1995 ExRAF 110 Utility
1986 127 HCPU
1985 110 PU
2012 Disco4
3rd Mar 2017 10:50am
ian series 1
Member Since: 17 Nov 2014
Location: south
Posts: 3127
You need to grind the shoulders of a couple of spanners to do this any sense! 80" 80" 86" 88" 90"
Wanted, Forward Control Anything considered.
3rd Mar 2017 1:08pm
Mo Murphy
Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2211
There is usually enough slop in pedal pivot to cover the free play.
MoThe Land Rover 90 - Many are called, few are chosen.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
80" 80" 86" 88" 90"
3rd Mar 2017 1:08pm
