 | Home > Maintenance & Modifications > Corrosion Prevention Guide! |
 
|
|
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 4990  
|
Many thanks Steve
Defenders currently in for a damn good Zagging 
BOOKING FROM 5th NOVEMBER IF YOU WANT TO BEAT THE WINTER SALT
£490, PM me or tel 01403 784686 anytime for full details... Chris Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  |
||
24th Sep 2016 12:27pm |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 4990
|
Tip of the week
Pull your wiper spindle rubbers up and give the unprotected metal a brush/squirt of ACF-50 a couple of times a year to prevent problems in the future. You can see the rust that dropped out of this 5 year old Defender spindle.
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
|
24th Sep 2016 2:54pm |
|
| jieming Member Since: 21 Feb 2016 Location: Kent Posts: 27 
|
Like Hairysteve I've just picked up my 110 from Chris and he's done a bloody brilliant job.
When I dropped it off last week we found out that it's done some serious wading in its past life and the cross members were full of solid lumps of clay! Chris had to break all this crap down and flush it out before even starting. The underside now looks like new and the time Chris has spent treating all high risk rot spots with ACF50 demonstrate the extra mile he goes. Thanks again Chris PS. Love the truck Hairysteve. I had a quick walk around it and it looks a serious piece of kit! |
||
|
25th Sep 2016 9:26pm |
|
| Leaky 110 Member Since: 12 Jul 2016 Location: Glasgow Posts: 62 
|
Great tips..... ACF 50 on order!
As a side point, does anyone know a good solvent for getting tape marks off paintwork? After I removed my masking paper there were still a few bits of adhesive that won't scrub off. Reluctant to use anything sharp. |
||
|
26th Sep 2016 12:05am |
|
| familymad Member Since: 13 Dec 2011 Location: Bucks Posts: 3463  
|
That 90 Adventure looks well on those rims 1951 80" S1 2.0
1995 110 300TDI 1995 90 300TDI |
||
|
26th Sep 2016 1:48am |
|
| nosnibod Member Since: 15 Aug 2007 Location: West Midlands Posts: 365 
|
I had the same problem and tried white spirits all sorts of things before finding that WD40 worked a treat - spray it on a let it soak for a few minutes. It also worked well on that double-side tape used for attaching number plates. Dave Gracie - 2015 110 XS County Station Wagon |
||
|
26th Sep 2016 9:56am |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 4990
|
Supra carcass in
Just had respray, no expense spared, owner has had it last twenty years since he was 12!
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
|
28th Sep 2016 12:24pm |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 4990
|
Nice mix of Defenders for next weeks work...
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
|
9th Oct 2016 11:58am |
|
| Rosco Member Since: 03 Dec 2010 Location: Burntwood Posts: 1805 
|
Is that a certain Dutch 130 at the back there?
If it is, its an awesome setup  2007 - Stornoway Grey 90 XS SW - Gone
2002 - Black Discovery II - Gone 2014 - Montalcino Red 110 XS SW |
||
|
9th Oct 2016 12:36pm |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 4990
|
That is 'Familymad's liner
 |
||
|
9th Oct 2016 12:40pm |
|
| AdamGT3 Member Since: 18 Oct 2016 Location: Beaconsfield Posts: 22 
|
Hi
First post here. We are about to pick up a 2007 Defender 90 and want to get it sorted. I cannot PM yet (as first message) but need to contact you regarding having it done properly before the winter set in. Thanks Adam |
||
|
18th Oct 2016 4:27pm |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 4990
|
Hi Adam,
01403 784686 CCalvert@CCAutomotive.co.uk Chris |
||
|
18th Oct 2016 8:34pm |
|
| AdamGT3 Member Since: 18 Oct 2016 Location: Beaconsfield Posts: 22
|
Hi Chris
Thanks, have e-mailed you. Regards Adam |
||
|
18th Oct 2016 9:23pm |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 4990
|
|
||
|
18th Oct 2016 9:23pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
