↓ Advertise on Defender2 ↓

Home > In Car Electronics > Switches needed
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
JWL



Member Since: 26 Oct 2011
Location: Hereford
Posts: 3443
England 2002 Defender 110 Td5 SW Coniston Green
I've been adding odd switches to the dashboard in mine for a number of years now, there's been a few different ideas and as shown below a few ideas can be seen


Click image to enlarge

I took the cigar lighter out and put in a socket along with one of those USB sockets. There's a row of rocker switches catering for heated seats, heated mirrors, heated screen master switch(will adjust the wiring in the future and use this for something else) and the middle one operates the flashing roof lights. In th spaces for the factory fitted heated switches I got some smaller rocker switches from Maplins and inset them into the LR sockets, one turns the permanent live for the USB sockets the other (not fully fitted in the picture) controls th reversing camera.

I have used the fuse board cover for the controls for the Eberspacher complete with a cheap Chinese 7 day timer as the fbh is only a D1, basic on off plus thermostat. An inside/outside thermometer is in the middle. Hidden away on the side of the cover is the isolator switch for the winch controls, I have a remote control for the winch and didn't want some kid playing with his remote control car start folding my bumper in!
Post #550298 21st Jul 2016 8:02pm
View user's profile Send private message View poster's gallery Reply with quote
Flyingfocrs



Member Since: 12 Jan 2015
Location: Deepest darkest Aberdeenshire
Posts: 155
Scotland 2011 Defender 110 Puma 2.4 USW Santorini Black
Yes, they agreed a refund after insisting it needed "bent and shoved in" to fit.
On my vehicle it was a good 1/2" too wide to fit in the space which was too much to bend and fit.
Knowing land rovers it's probably just dodgy build quality and alignment on my vehicle lol
Post #550305 21st Jul 2016 8:32pm
View user's profile Send private message View poster's gallery Reply with quote
BuckBlu110



Member Since: 19 Apr 2014
Location: in the pub
Posts: 709
United Kingdom 1994 Defender 110 BMW M57 3.0 Diesel CSW Buckingham Blue
Flyingfocrs wrote:
BuckBlu110 wrote:
If you don't fancy cutting your dash, how about one of these:
http://m.ebay.co.uk/itm/231848689785?_mwBanner=1
Think it fits in next to the steering column. They can supply switches too which look similar to Carling switches, but not sure if they need the same size hole or not. if you definitely want Carling switches, might be worth asking them if they'll supply one without the hole cut in it so ou can cut it to your needs.


I bought one of these but it didn't fit, be interested to know if anyone else has tried one?
Ended up just cutting a hole in the front of the cubby.
[URL=]
Click image to enlarge[/URL]


Shocked wow that really doesn't fit! There's no way you would have bent and shoved it in there!!

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Mr. Green
Post #550330 21st Jul 2016 10:45pm
View user's profile Send private message View poster's gallery Reply with quote
neil5886



Member Since: 15 Feb 2016
Location: York
Posts: 24
United Kingdom 2014 Defender 110 Puma 2.2 XS CSW Indus Silver
Flyingfocrs wrote:
BuckBlu110 wrote:
If you don't fancy cutting your dash, how about one of these:
http://m.ebay.co.uk/itm/231848689785?_mwBanner=1
Think it fits in next to the steering column. They can supply switches too which look similar to Carling switches, but not sure if they need the same size hole or not. if you definitely want Carling switches, might be worth asking them if they'll supply one without the hole cut in it so ou can cut it to your needs.


I bought one of these but it didn't fit, be interested to know if anyone else has tried one?
Ended up just cutting a hole in the front of the cubby.
[URL=]
Click image to enlarge[/URL]




I just ordered one myself looks a better solution than cutting the dash, so I'm hoping for better fitment than yours, but will post up here, when it arrives to show if it does or not.

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Mr. Green
Post #550362 22nd Jul 2016 8:49am
View user's profile Send private message View poster's gallery Reply with quote
neil5886



Member Since: 15 Feb 2016
Location: York
Posts: 24
United Kingdom 2014 Defender 110 Puma 2.2 XS CSW Indus Silver
Well my order arrived and it fits as well as the one above, in which I mean it doesn't no way near. I'll contact the shop and ask about a refund.
Post #551070 25th Jul 2016 10:28am
View user's profile Send private message View poster's gallery Reply with quote
Vitesse



Member Since: 21 Mar 2014
Location: Sussex
Posts: 372
United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Santorini Black
i thought that was an excellent idea to use the space next to the steering column. Having noted that the product doesn't fit, I decided to make something uses aluminium and have fabricated it at the weekend. Will hold two darling switches but it can fit three if carefully made. When finished I will send some pics. Wires can easily be routed as there is a hole already there created at the factory and easily reached. Thumbs Up 2015 90 XS Santorini Black
Post #551119 25th Jul 2016 2:04pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums