DEFENDER2.NET - View topic - my mrs 90 no drive !!!!!!!!!

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > my mrs 90 no drive !!!!!!!!!

Page 2 of 2

Print this entire topic ·

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

Not that much of a job , replace coupling , lots of grease and your probably be done for life

once greased i think there last really well

I took my t/box out just to check it , all looked good but dry so greased and fitted back together , made it seem bit smoother and quieter

6th Jan 2015 9:16pm

defenderq

Member Since: 04 Jan 2015
Location: oxford
Posts: 18

im pretty

handy with the spanners ...if was no warrantee would do it meself...but suppose there is a chance transfer box goosed will let them do it....loads of info on here from you guys ...but gonna tie me hands behind me back

6th Jan 2015 9:26pm

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

Make sure its greased well

6th Jan 2015 11:32pm

defenderq

Member Since: 04 Jan 2015
Location: oxford
Posts: 18

My mrs watched landy being loaded on low loader 10 mins ago will update very soon

8th Jan 2015 11:45am

defenderq

Member Since: 04 Jan 2015
Location: oxford
Posts: 18

repair dude

spoke to landy repair dude said it is shaft from gearbox to transfer box, hopefully all sorted tomorrow before snow... dealer said he will pay as it still under warrantee happy days

. Repair dude been doing landys for many years never done one of these shafts. Funny so many failures on here .....

13th Jan 2015 8:05pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16894

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Make sure that they grease the new splined coupling very thoroughly, otherwise you'll be doing the job again soon!

13th Jan 2015 11:28pm

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6265

2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey

other than possible tell tales of rust around the drain hole (and pulling the transfer box off) I guess there's no way of knowing if the shaft is greased up or not?

14th Jan 2015 8:17am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16894

Not until it fails prematurely, sadly.

14th Jan 2015 9:15am

defenderq

Member Since: 04 Jan 2015
Location: oxford
Posts: 18

my landys back

thanks to the very nice man at mid engineering in wantage even drove to get me when i got lost Legend !!!! cheers Mark

Showed me rusty old lump of metal removed from the gearbox...drove her home all good. Greaced and new fingers crossed she will be ok ......come on snow you can arrive now ...we are ready !!!!!!

15th Jan 2015 10:53pm

Page 2 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum