 | Home > General & Technical (L663) > What’s behind this panel? |
 
|
|
|
| umbertob Member Since: 21 Jun 2020 Location: Altadena, CA Posts: 133  
|
If you had the 3-zone climate control with rear cooling assist option, that flat panel would be replaced by a grey plastic cover, bulging out into the cargo area about 4 or 5 inches, enclosing an auxiliary blower for the independent rear passengers and cargo area climate dials and controls. I did remove that panel in the past but don't recall how much room there was back there without the optional blower - must not be much though, considering how fairly bulky that cover is when the auxiliary blower unit is fitted. 2020 NAS Defender 110 HSE 5-seater / Silver / Khaki / Black Pack / Black Roof / Satin Film / Cold Pack / Off-Road Pack / Advanced OR Pack / Comfort + Convenience Pack / Sirius + HD radio / HUD / Meridian Surround
|
||
16th Dec 2023 5:38pm |
|
| chpsk8 Member Since: 26 Sep 2023 Location: Midwest Posts: 32
|
Looks like it just pops off with clips. Get a panel tool and give it a pop and see what's back there.
What are you jack dimensions? |
||
|
16th Dec 2023 7:17pm |
|
| RDR Member Since: 27 Apr 2018 Location: Derbyshire Posts: 570 
|
Thanks all and Yeh I’ll get it off tomorrow and see what’s what behind it even if it’s a little bit of space it will help I can fab a frame off it for the jack.
The jack is a powerbuilt All in One it’s basically a jack stand with bottle jack built in and my preferred choice after a JLR scissor jack failed on me  110 MY23.5 X Dynamic HSE
RR MY23 HSE PHEV D5 MY19 HSE - Now Sold D4 MY16 HSE Luxury - Now Sold D4 MY12 HSE - Gone D3 MY06 S - Gone but not forgotten |
||
|
16th Dec 2023 7:50pm |
|
| Moo Member Since: 01 Oct 2021 Location: Bath Posts: 1043 
|
I'm intrigued by this. Look forward to seeing how you get on. I've wondered about whether I could store a better jack and kit behind the spare wheel. Eiger Grey MY23 D250 SE with bits. Known as Noddy.
|
||
|
16th Dec 2023 8:22pm |
|
| RDR Member Since: 27 Apr 2018 Location: Derbyshire Posts: 570
|
Behind the wheel something I thought of too but would rather keep it out of the elements.
For reference my load space  Click image to enlarge This spot was close needed about 30mm more depth Click image to enlarge I want the jack stored upright to avoid leaks. 110 MY23.5 X Dynamic HSE RR MY23 HSE PHEV D5 MY19 HSE - Now Sold D4 MY16 HSE Luxury - Now Sold D4 MY12 HSE - Gone D3 MY06 S - Gone but not forgotten |
||
|
16th Dec 2023 8:30pm |
|
| Moo Member Since: 01 Oct 2021 Location: Bath Posts: 1043
|
What jack is that? Looks good. Eiger Grey MY23 D250 SE with bits. Known as Noddy.
|
||
|
16th Dec 2023 8:55pm |
|
| RDR Member Since: 27 Apr 2018 Location: Derbyshire Posts: 570
|
It’s a PowerBuilt all in one, very sturdy and safe it drops into the jack stand ratchets as you raise it then to lower you bump it up a bit, disengage the ratchet and lower on the bottle jack bleed screw. Been good for my Discoveries and the full fat.
Click image to enlarge 110 MY23.5 X Dynamic HSE RR MY23 HSE PHEV D5 MY19 HSE - Now Sold D4 MY16 HSE Luxury - Now Sold D4 MY12 HSE - Gone D3 MY06 S - Gone but not forgotten |
||
|
16th Dec 2023 9:50pm |
|
| Moo Member Since: 01 Oct 2021 Location: Bath Posts: 1043
|
Thanks. Just bought one.
 Eiger Grey MY23 D250 SE with bits. Known as Noddy. |
||
|
16th Dec 2023 11:45pm |
|
| stevemfr Member Since: 18 Sep 2022 Location: Strasbpurg Posts: 100 
|
Very cool jack/-stand. Thanks for the info!
RRC 2Dr, RRC 4Dr, P38, and 2 L322s, 2 FL1s and a L663 on the way |
||
|
24th Dec 2023 1:56pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
