DEFENDER2.NET - View topic - CSI or Optimill front washer fitting

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > CSI or Optimill front washer fitting

Page 1 of 1

Print this entire topic ·

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3862

CSI or Optimill front washer fitting

Hello

For anyone who has already done this, did you change the pump / pipe also or just add the new spray unit.

I need to sort mine as dispite changing the inline bit of plastic it was good for a little bit and now dire again, would rather sort before winter.

I've ordered the CSI one and added the pump and pipe, I just wonder if I actually need them? Maybe just fit and try and see what I think.

10th Sep 2025 8:30am

300TDi CSW Phil

Member Since: 03 Apr 2016
Location: Bracknell
Posts: 857

1995 Defender 110 300 Tdi CSW Epsom Green

I replaced the jet and the pump as it was barely doing anything.

I removed the one way valve temporarily and blew the pipe through from the inside and then the bit in the engine bay with an airbrush compressor to make sure it was clear. 1995 300 Tdi Epsom Green- Slowly Turning into Keswick Green - It's a keeper.
Wide Track Sankey- In bits- Gone to a new home
M0XQS

10th Sep 2025 10:51am

Trev

Member Since: 01 Jul 2023
Location: Fife
Posts: 29

2008 Defender 110 Puma 2.4 USW Zermatt Silver

I fitted the Optimil system and replaced the pipe and pump. Night and day difference.

10th Sep 2025 7:21pm

Ianh

Member Since: 17 Sep 2018
Location: Essex
Posts: 2513

I have s design and development engineering front washer jet, obtained at a very good price from a member who decided not to fit it.

Once fitted it performed well with existing pump, but if I needed a better pump I would purchase the disco 2 headlight washer pump.

10th Sep 2025 11:08pm

HardCharger

Member Since: 03 Mar 2013
Location: Manila
Posts: 789

2011 Defender 110 Puma 2.4 SW Stornoway Grey

Have the CSI nozzles installed front and rear but they did not come with the pump and pipe. I only found out about the pump and pipe after and only available from CSI. If not, where else can they be had? I bought my set from 4x4Overlander.

In any case, they work OK as they spread the windscreen washing fluid in a fan like pattern rather than just the spot squirt of the originals. Covers more of the windscreen in one go so will also help save on washer fluid. Same for the rear. As mentioned, running stock pump still. If I can buy the pump and new pipes separately, may upgrade still as I'm curious to see the difference.

Wanted Optimill but they were transitioning their site and comms were spotty so had to look for alternatives as I had a schedule to keep and had to finalize my upgrade budget. No Better Friend, No Worse Enemy

11th Sep 2025 1:30am

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3862

Thanks all

I will report back, when I fit it, I may just fit the spray unit and see what its like before comitting to the pipe and pump.

I do like the optimil stuff (I have a few bits) but tend to hear issues with cleaning products on them.

As this part is functional more than looks the CSI part should be (I hope) better than what I have had for 10 years

11th Sep 2025 8:40am

Trev

Member Since: 01 Jul 2023
Location: Fife
Posts: 29

If you were just spitting on your windscreen from five meters away it would still be an improvement, so I expect you'll be happy.

11th Sep 2025 9:15am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum