 | Home > Td5 > Black bulkhead connector block - BMW AMP |
 
|
|
|
| geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410  
|
Hi folks. Need some knowledge.
I have to get a pin out of this black bulkhead connector. It is one of the main harness connectors. It is a BMW AMP connector with weird locking slides inside the connector. How do I remove one of the pins???  Click image to enlarge Click image to enlarge Click image to enlarge I have a vague thought I might need a pin extractor for this one, but that is a complete guess  |
||
13th Jul 2023 8:32pm |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6491 
|
https://www.defender2.net/forum/topic84449.html
1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
13th Jul 2023 10:11pm |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6491
|
Shame you’re a bit far from me as I have the proper removal tool for these now.
1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
14th Jul 2023 7:53am |
|
| geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410
|
Martin
 I should have known you'd answer Thanks for the thought too.
I did search long and hard for the answer but had not realised it is the same as the fuel pump connector. That is handy to know. Ok, set of terminal tools on their way. Should have bought a set years ago to be honest  Amazing how much you can do with the thin end of a cable tie or a jewellers screwdriver.
Just going to link this back to the MIffy thread so I can find it again a a later date 
https://www.defender2.net/forum/topic53859-615.html |
||
|
14th Jul 2023 8:11am |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
