DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Injector Fault

Page 1 of 1

Print this entire topic ·

Mat4x416

Member Since: 09 Nov 2022
Location: Centre
Posts: 3

Injector Fault

Hi,

I'm new here, and I hope I can help you and that you can also help me.

First, I am French and my english is not very good, but God created translator

Secondly, I have a problem with my TD5 and i don't know what it is, maybe you can help me to understand the problem and to fix it

So my defender is doing cylinder cuts.
I cut and restart my engine and here we go again until next time.
Fault code are:
- 3183 Injector 1 Long peak load recorded
- 3185 Injector 3 Long peak load recorded
- 3186 Injector 4 Long peak load recorded
- 3187 Injector 5 Long peak load recorded
- 3192 Injector 2 Short peak load recorded
I use the Lynx of Britpart for my diagnostic

I have no oil in my injector wiring harness, but i changed it
I cleaned my fuel line and it was very dirty
But I did not dismantle the injectors, nor the pressure regulator for cleaning.

I still have the problem and I don't know what else to do.

Have you ever had this kind of problem ?

Thanks in advance to the community.

Mathieu or Mathew

9th Nov 2022 6:35pm

Sicastle71

Member Since: 21 Aug 2019
Location: West Lancs
Posts: 126

First things to check would be fuel pump relays and change the fuel filter rebleed and try to start. Could also be the fuel pump in the tank this may need changing or could be struggling to lift fuel and may need cleaning The fuel pressure regulator normally drops fuel down the back of the block and onto the gearbox on the inlet side hope that helps

10th Nov 2022 12:24am

Mat4x416

Member Since: 09 Nov 2022
Location: Centre
Posts: 3

Thank you for jour answer

I will check it all

I took advantage of the cleaning of the diesel circuit to replace the filter

10th Nov 2022 8:37am

Mat4x416

Member Since: 09 Nov 2022
Location: Centre
Posts: 3

Hi,
The problem is solved, I had a wire in my engine harness which was damaged due to the friction of the harness on the alternator

Thank'u

6th Dec 2022 9:55pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum