DEFENDER2.NET - View topic - Puma Defender Mid Crossmember Replacement

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Puma Defender Mid Crossmember Replacement

Page 1 of 1

Print this entire topic ·

MSmith7069

Member Since: 26 Apr 2021
Location: South Yorkshire
Posts: 12

2007 Defender 110 Puma 2.4 XS CSW Stornoway Grey

Puma Defender Mid Crossmember Replacement

Hi All,

Just wondered if anyone could shed any light on this job.
I need to replace mine and from what I am reading its a body off job. Has anyone got any different ways or has done this job before that could help with the process.
Its a 2007 Puma Defender 110 XS 5dr.

Thanks

29th Nov 2022 7:57pm

Ianh

Member Since: 17 Sep 2018
Location: Essex
Posts: 2285

https://www.defender2.net/forum/topic70049...rossmember

If you do a search there are a few topics on it, like the one above.

29th Nov 2022 8:28pm

MSmith7069

Member Since: 26 Apr 2021
Location: South Yorkshire
Posts: 12

Thanks,
I have had a look around and I am struggling to find anything that is specific to the puma models.
Will continue to look.
If anyone has any other tips, please let me know

29th Nov 2022 8:38pm

Ianh

Member Since: 17 Sep 2018
Location: Essex
Posts: 2285

Your dead right, I have done a good search and can’t find anything either, perhaps Puma mid crossmembers have not had many issues yet due to lower age.

29th Nov 2022 10:38pm

rustandoil

Member Since: 08 Sep 2012
Location: Cotswolds
Posts: 819

2005 Defender 110 Td5 XS DCPU Bonatti Grey

I think that the Puma mid crossmember is very similar to the TD5... The job itself will be pretty much the same I'd imagine

30th Nov 2022 7:31am

MSmith7069

Member Since: 26 Apr 2021
Location: South Yorkshire
Posts: 12

Thanks for your reply.
From what I can see online when looking at the part the puma mid member has four uprights which are welded to the part. it is these that are stopping it from being slid into place. Not sure if they make a bolt in one but I haven't come across one unfortunately.

30th Nov 2022 9:12am

rustandoil

Member Since: 08 Sep 2012
Location: Cotswolds
Posts: 819

Take a look at YRM... I think you'll find what you need there..... Galvanised too!
Edit:... I can't find a crossmember with bolt on uprights either 😕
You'll have to wait for a Puma owner to show up and advise

1st Dec 2022 9:05pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum