DEFENDER2.NET - View topic - TD5 custom radio surround printed

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > TD5 custom radio surround printed

Page 1 of 1

Print this entire topic ·

phillips321

Member Since: 16 Dec 2021
Location: UK
Posts: 92

2005 Defender 110 2.5 TD DCPU Belize Green

TD5 custom radio surround printed

So after my thread here: https://www.defender2.net/forum/topic81951.html

I bit the bullet and bought the stereo. (I won't list where from as the customer service from them was appalling)

Quick mounting so I could use it for a few days to make sure I was happy with it before proper mounting.

Initial playing with it:

Click image to enlarge

Printing the surround ~12hours:

Click image to enlarge

The printed surround:

Click image to enlarge

Click image to enlarge

And finally fitted:

Click image to enlarge

28th Jan 2022 5:52pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4395

I can understand why you've done this, the Mud double DIN is a little

but hey.

Curious how is visibility of the screen from the drivers seat?

28th Jan 2022 7:16pm

phillips321

Member Since: 16 Dec 2021
Location: UK
Posts: 92

Screen visibility fine from drivers seat. This stereo has a screen that can be viewed from quite an angle.

I didn’t want to spend £100+ on a mud stuff surround. Too pricey for someone who had a 3d printer.

28th Jan 2022 8:57pm

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2870

My defender is full of printed parts. If you print that upside down you can get a nice finish on the first layer.

Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

29th Jan 2022 11:44pm

phillips321

Member Since: 16 Dec 2021
Location: UK
Posts: 92

I was tempted to print upside down but then I’d have loads of support material which is sometimes hard to remove.

30th Jan 2022 9:06am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum