 | Home > Maintenance & Modifications > defender doors and panels |
 
|
|
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101   
|
i have a new 110 project.
i want all new doors and b pillars before paint as this is gonna anyone able to quote me or are they cheaper from landrover? I have a td5, will the door internals fit the later steel puma doors? |
||
17th Aug 2011 7:13pm |
|
| bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 
|
hi T1g
you can get new galv. doors for £500 inc vat from Ashtree ... |
||
|
17th Aug 2011 10:22pm |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5026 
|
Make sure you use a good body shop, heard many stories of paint peeling off galv even when it has been etch primed etc. Dunsfold DLR don't spray over galv anymore unless customer is adamant. Doors should be ok if treated properly from new - Supertrol is the stuff to use on the inside, used by car manufacturers for years, is vibration and "slam" resistant
 E-Bay for doors  A few people have also eased the door edges back and slipped in a plastic lining in between the steel door frame and ali panels!
Thick black stuff that stays on for life - this should be the right can but worth checking http://www.grampianfasteners.com/Products.aspx?Cat=15183020 |
||
|
18th Aug 2011 9:22am |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101
|
tbh boys mt td5 doors have lasted 10 years so new doors with waxoil etc will last better. all new doors seem to be made with a barrier / silkoflex seal between th frame and the skin.
|
||
|
18th Aug 2011 8:10pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
