DEFENDER2.NET - View topic - Windscreen & bulkhead foam...leaks curing, again!

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Windscreen & bulkhead foam...leaks curing, again!

Page 1 of 1

Print this entire topic ·

Fat Cog

Member Since: 19 Mar 2012
Location: Oxfordshire & Devon
Posts: 502

2016 Defender 90 Puma 2.2 HT Corris Grey

Windscreen & bulkhead foam...leaks curing, again!

Hi all...it seems like I've been waging war on LR leaks for over 45 years & yes, I'm still failing!

So, I recently under warranty had a new windscreen surround & as per usual with anything involving main dealers, it came out worse than before & since said warranty repair I've been suffering from the normal wet feet issue & having stripped everything down believe its permeating through the foam seal between the bulkhead & windscreen (which it didn't before going in).

Now, I want to try something a bit different from smearing Tiger Seal & Captain Tolleys etc & was wondering whether anyone on the forum has fitted a discreet finishing trim/moulding strip/self adhesive strip etc along the full length of the foam seal & if yes, success rates & what you actually fitted?

Thanks in anticipation Since 1973...S1, Air Portable's, Defender's, but only my Wolf TUL HS GS remains

30th Jan 2021 6:24pm

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3616

Watching in anticipation! Having the same issues at the moment.

30th Jan 2021 7:23pm

JPE

Member Since: 19 Nov 2018
Location: South West England
Posts: 315

2013 Defender 110 Puma 2.2 XS CSW Firenze Red

I'm having the same issue also. Just got some Captain Tolleys but will watch this thread with interest...

30th Jan 2021 8:23pm

Shroppy

Member Since: 25 Feb 2016
Location: Shropshire
Posts: 848

1986 Defender 130 V8 Petrol HCPU Aintree Green

I've had success with a bead of sikaflex along the outer face of the seal in the past. With careful masking it can look 'factory' and by sealing any gaps between the frame/seal/bulkhead it should stop the leak.

1985 127 V8 Build Thread
Series 2 109"
Series 1 80"

31st Jan 2021 11:22pm

donmacn

Member Since: 07 Nov 2017
Location: Nth Scotland
Posts: 1829

There was something on here a few/couple of years ago - can't remember who it was - who suggested some vinyl strips or 'helicopter tape'.

I thought about it then but never actually got round to it. Donald

1994 Defender 300Tdi 110 SW - owned since 2002 - 230k miles and going strong
(The 'rolling restoration' or tinkering thread: http://www.defender2.net/forum/topic58538.html )
2000 Range Rover P38 4.0L V8

in the past..
RR classic - fitted with 200Tdi
1984 RR classic - V8 with ZF auto box
1993 Discovery 300Tdi

not to mention the minis and the Type 2 VW camper...

31st Jan 2021 11:44pm

Fat Cog

Member Since: 19 Mar 2012
Location: Oxfordshire & Devon
Posts: 502

JPE wrote:
I'm having the same issue also. Just got some Captain Tolleys but will watch this thread with interest...

Thanks Shroppy & Donmach...I've previously used Tiger Seal to good effect but I'm not the best at using a sealant gun & my results have been mixed. I'm sure their is a strip of black PVC or similar which is a bit more substantial than tape but not too obvious to the untrained eye which can be used & I'd be amazed if its not been used before. Since 1973...S1, Air Portable's, Defender's, but only my Wolf TUL HS GS remains

31st Jan 2021 11:53pm

donmacn

Member Since: 07 Nov 2017
Location: Nth Scotland
Posts: 1829

No bother. I like Caap'n Tolley's stuff - but I think it would be awkward to use there without causing runs.

Have a google for helicopter tape - I think (could be an urban myth!) that it's meant for the leading edge of helicopter rotors. It comes in a transparent form ( I've used on bike frames) so if you get it on nicely, on a warm day, it would be pretty hard to see. Donald

1994 Defender 300Tdi 110 SW - owned since 2002 - 230k miles and going strong
(The 'rolling restoration' or tinkering thread: http://www.defender2.net/forum/topic58538.html )
2000 Range Rover P38 4.0L V8

in the past..
RR classic - fitted with 200Tdi
1984 RR classic - V8 with ZF auto box
1993 Discovery 300Tdi

not to mention the minis and the Type 2 VW camper...

1st Feb 2021 12:00am

Fat Cog

Member Since: 19 Mar 2012
Location: Oxfordshire & Devon
Posts: 502

Funnily enough in a previous life I was helicopter crew & yes, we used to use said tape, its brilliant stuff but I'm not sure I have the skills to put a thin strip on neatly!

I can see defaulting to Tiger Seal...again! Since 1973...S1, Air Portable's, Defender's, but only my Wolf TUL HS GS remains

1st Feb 2021 12:10am

nitram17

Member Since: 09 Jun 2014
Location: newcastle
Posts: 2260

i use cap trolleys plus acf 50 greace..the trolleys goes hard and the greace fills in the gaps.

1st Feb 2021 1:59am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum