DEFENDER2.NET - View topic - Will not turn over

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Will not turn over

Page 1 of 1

Print this entire topic ·

robrennie

Member Since: 20 Mar 2018
Location: Somerset
Posts: 28

1998 Defender 90 V8 Petrol 50th Auto Atlantis Blue

Will not turn over

Hi all,

I have a poverty spec truck 2007 90 - it has been converted to soft sot

Just spent the afternoon taking the interior light loom down below the dash and wiring in the interior light. This required instrument binnacle to be moved (not disconnected) and generally bits of plastic,

I did route the wire around the fuse box - but didn’t take anything out.

Light works great - but now the car does not turnover at all!

Any ideas - or even a process to check.

All I have done thus far is check a couple of obvious fuses a d disconnect the light in case bizarrely that was part of the issue.

Cheers

Rob

7th Feb 2021 5:50pm

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3616

You have reconnected the battery?!

7th Feb 2021 5:53pm

robrennie

Member Since: 20 Mar 2018
Location: Somerset
Posts: 28

😀 good thought - but never disconnected it.

All lights work - dash lights up like normal, indicators work - cannot find anything that doesn’t work - apart from not turning over 😀

7th Feb 2021 5:55pm

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3208

2012 Defender 90 Puma 2.2 CSW Santorini Black

By ‘poverty spec’ you mean you have no immobilizer/ 10AS, right?

Possible you knocked one of the wires off the ignition switch? 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

7th Feb 2021 5:59pm

robrennie

Member Since: 20 Mar 2018
Location: Somerset
Posts: 28

There is an after market immobiliser - not sure what 10AS is?

I guess it is possible to have knocked a wire off the ignition- I’ll see if there is a unique wire for starting and does that have a separate connector there

Cheers

7th Feb 2021 6:22pm

robrennie

Member Since: 20 Mar 2018
Location: Somerset
Posts: 28

Dinnu wrote:
By ‘poverty spec’ you mean you have no immobilizer/ 10AS, right?

Possible you knocked one of the wires off the ignition switch?

Dinu- thank you - I had knocked the wire off the switch!

I was looking for a clever thing related to immobiliser....

7th Feb 2021 7:11pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum