DEFENDER2.NET - View topic - oil flter housing mounting bolt torque settings

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > oil flter housing mounting bolt torque settings

Page 1 of 1

Print this entire topic ·

alexatnd

Member Since: 19 May 2015
Location: Yorkshire
Posts: 249

oil flter housing mounting bolt torque settings

Hi,
Recently removed both oil filter mounting units (centrifugal and full flow) and replaced the oil seal on each one. Couldn't find any reference to torque settings for the mounting bolts ...

Anyone any Idea ?

Rgds
Alex Santa - 1977 Series 3 - new chassis, tub, disc brakes,SU Carb
Gertie - 1999 110 TD5 - like a Phoenix from the ashes back on road... almost
Effie - 2004 110 TD5 County

7th May 2020 12:47pm

Baz8046

Member Since: 08 Feb 2016
Location: Chatham
Posts: 78

Hi Alex,
The rotor housing is 25Nm as I have recently had mine off to do the water pump.
I can't find a reference to the main filter housing but may well be similar.

Click image to enlarge Defender Td5 Commercial 2002
Discovery 3 TDV6 HSE 2005
Discovery 4 SDV6 Landmark 2016

7th May 2020 5:18pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum