 | Home > Technical > Standard Front Bumper Finish? |
 
|
|
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11240   
|
A very poor paint. Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
5th May 2020 5:24pm |
|
| UtilityTruck Member Since: 09 Jan 2014 Location: Oxford Posts: 463
|
Yes; oem’s rarely powder coat 2014 Keswick Utility 2.2
|
||
|
5th May 2020 6:05pm |
|
| Joe the Plumber Member Since: 18 Dec 2013 Location: Midlands Posts: 907 
|
"Corrosion resistant rust"....
|
||
|
5th May 2020 7:24pm |
|
| notxal Member Since: 20 Nov 2019 Location: Shropshire Posts: 89 
|
Ok Chaps thanks for that, now what would be the best products to refurb before it gets too bad? Assume it's taken back down to bare metal and treated with Kurust.
|
||
|
5th May 2020 7:43pm |
|
| LR90XS2011 Member Since: 05 Apr 2011 Location: bickenhill Posts: 3613 
|
buy a new one, dinitrol the rear and wipe ACF50 on the front every few weeks and it wont rust DEFENDER 90 TDCI XS,
I hope everyone is well and your land rovers make you happy |
||
|
5th May 2020 8:42pm |
|
| Grouse Member Since: 16 Apr 2012 Location: on the hill Posts: 512 |
Buy a galvanised one and then paint it black 2017 Range Rover L405 Vogue SE V8 Diesel #16
Land Rover 110 300 TDI |
||
|
5th May 2020 9:47pm |
|
| Pacha Member Since: 23 Feb 2020 Location: North Yorkshire Posts: 772 
|
^^^^^
This. Rgds. Chris |
||
|
5th May 2020 10:01pm |
|
| miker Member Since: 13 Sep 2015 Location: Surrey Posts: 1758 
|
Slightly rusty
|
||
|
6th May 2020 1:06am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11240
|
Also this ^^^. Available from Paddocks for less that £60:  Click image to enlarge https://www.defender2.net/forum/post729132.html#729132 Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
6th May 2020 8:36am |
|
| X4SKP Member Since: 29 Nov 2013 Location: Berkshire Posts: 2287 
|
Worth trying to get Dinitrol (or equivalent) properly inside the Bumper
regardless of what type and finish is opted for. My Dinitrol is 6 years old now and I'm still really pleased with it... with all but no signs of breaking down, or coming away at 'the edges'.... despite the effort to DIY this with certainly a good few days to prep' it remains (possibly physiologically too) one of the best long term steps for the Defender... Landrover really neglected this aspect IMO Click image to enlarge SKIP https://www.defender2.net/forum/topic83242.html |
||
|
6th May 2020 8:51am |
|
| Joe the Plumber Member Since: 18 Dec 2013 Location: Midlands Posts: 907
|
I replaced my front bumper with a totally standard looking but 5mm thick one. Bothered if I can remember from where though, unfortunately.
And as I drive a British vehicle, like the rest of the underside, it's protected with a fine British product: Dynax: www.bilthamber.com |
||
|
6th May 2020 9:03am |
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
Available from Paddocks for less that £60 not at present online close
|
||
|
6th May 2020 9:05am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11240
|
Click image to enlarge Seems ok to me. Their galv. bumper is even cheaper than I remember at under £50, too! https://www.paddockspares.com/nrc9211-fron...nised.html Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
6th May 2020 9:30am |
|
| Pacha Member Since: 23 Feb 2020 Location: North Yorkshire Posts: 772
|
They are restricting the number of online orders per day - just need to keep an eye on the site. Rgds. Chris |
||
|
6th May 2020 9:54am |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
