 | Home > Expedition & Overland > Henri the 110 goes pop top! |
 
|
|
|
| Timcat Member Since: 20 Jul 2016 Location: Tanzania at the moment Posts: 1008   
|
There you go, you have to angle the mirror to get the visors right forward but no big problem.
 Click image to enlarge Click image to enlarge |
||
28th Oct 2020 11:29am |
|
| BuckBlu110 Member Since: 19 Apr 2014 Location: in the pub Posts: 709 
|
 |
||
|
28th Oct 2020 12:54pm |
|
| Timcat Member Since: 20 Jul 2016 Location: Tanzania at the moment Posts: 1008
|
Had some time at the fabricators today. Draw system coming on.
Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
30th Oct 2020 5:41pm |
|
| Timcat Member Since: 20 Jul 2016 Location: Tanzania at the moment Posts: 1008
|
Draws back & had a couple of hrs fitting in the rain, very pleased with them though.
Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
14th Nov 2020 4:13pm |
|
| Badger110 Member Since: 06 Feb 2018 Location: South hams Posts: 1025 
|
It's looking tidy Timcat
I did a similar drawer idea as the footwell is wasted space, but only on one side, the other side allows me to slot a Bahco tool set into |
||
|
14th Nov 2020 5:07pm |
|
| wyvern Member Since: 14 Dec 2009 Location: Cornwall Posts: 2070 
|
fabulous
looking good and great use of available space I keep my high lift jack and tool kits in that area Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html
Elgar -TDCI(Puma) 110XS Dormobile - now sold Devon & Cornwall 4x4 Response - DC126 |
||
|
14th Nov 2020 5:14pm |
|
| Timcat Member Since: 20 Jul 2016 Location: Tanzania at the moment Posts: 1008
|
Going to have a bracket made so the hi-lift sits on the cross member at the back with another bracket off the swing away to brace it. Just have a padlock securing it ( cover the important bits in grease) not ideal but short on space inside for extended trips away.
Tools will go in the Zarges boxes on the roof / recovery kit & service kit will go in the o/s gun case. Should get the main kitchen back from paint next week.. |
||
|
14th Nov 2020 6:18pm |
|
| Timcat Member Since: 20 Jul 2016 Location: Tanzania at the moment Posts: 1008
|
Last bit of time on the truck for a few weeks as have a kitchen & bathroom to do at the same time!
Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
15th Nov 2020 12:41pm |
|
| Zed Member Since: 07 Oct 2017 Location: In the woods Posts: 3014 
|
Very smart mate. Looking forward to your next uodates. WARNING.
This post may contain sarcasm. |
||
|
15th Nov 2020 12:55pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10502 
|
Cracking job your doing with the draws and the floor
1996 Golf Blue 300Tdi 110 Pick up. Keeper.
Clayton. |
||
|
16th Nov 2020 9:27pm |
|
| Timcat Member Since: 20 Jul 2016 Location: Tanzania at the moment Posts: 1008
|
Kitchen now back from paint!
Click image to enlarge |
||
|
30th Nov 2020 9:03pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10502
|
WOW top job, i would be well chuffed with that
 it's going to look great in Henri 1996 Golf Blue 300Tdi 110 Pick up. Keeper.
Clayton. |
||
|
30th Nov 2020 10:16pm |
|
| Timcat Member Since: 20 Jul 2016 Location: Tanzania at the moment Posts: 1008
|
Yes, looks well for a bit of bent aluminium. My nephew painted it ( he painted the new defenders in Bond) before leaving JLR & starting his own business. He said it was a real pain because of all the inside spraying.
|
||
|
1st Dec 2020 7:22am |
|
| wyvern Member Since: 14 Dec 2009 Location: Cornwall Posts: 2070
|
wow !! the whole thing is coming together - looking forward to seeing the fitted back now !
Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html
Elgar -TDCI(Puma) 110XS Dormobile - now sold Devon & Cornwall 4x4 Response - DC126 |
||
|
1st Dec 2020 9:18am |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
