 | Home > Puma (Tdci) > Puma bulkhead factory bodge. |
 
|
|
|
| Gloucesternige Member Since: 17 Jan 2020 Location: In the garage Posts: 114   
|
Hi everyone,
As some of you will know from following my You Tube channel, I am stripping and rebuilding my 2011 Puma 2.4 which I bought new. Imagine myn surprise when I noticed these welds on the bulkhead.. what a mess!! Does anyone here have the same or seen the same? It must be a factory rework??  Click image to enlarge I'm going to paint the bulkhead once I've cleaned up a few areas. I'm not sure whether I should tidy this up or just paint over it?? Click image to enlarge Thanks for looking Nige Check out my You Tube channel https://www.youtube.com/c/Defender90KeswickNigelsLandRoverchannel |
||
8th Feb 2020 6:21pm |
|
| htb2 Member Since: 02 Nov 2018 Location: aberdeenshire Posts: 510 
|
That's grim, seen better cut and shut jobs.
|
||
|
8th Feb 2020 7:14pm |
|
| ickle Member Since: 22 Jul 2010 Location: South Vendee Posts: 1728  
|
Wow - Friday afternoon job, or "Fred we need another bulkhead for the Load Lane order - (Fred) I've only got the scrap one the apprentices practiced on - that'll do!"
|
||
|
8th Feb 2020 7:22pm |
|
| defender9 Member Since: 12 Mar 2016 Location: Fylde Coast Posts: 1613 
|
Is it a rework job where spot welds have failed?
|
||
|
8th Feb 2020 9:52pm |
|
| williamthedog Member Since: 29 Dec 2012 Location: south wales Posts: 3441 
|
Think the spot welder went ape
 š¬ |
||
|
8th Feb 2020 11:10pm |
|
| JimC Member Since: 22 Jan 2011 Location: NOVA Posts: 164  
|
It looks like the bulkhead got creased and they welded on studs to affix a slide hammer...
|
||
|
8th Feb 2020 11:15pm |
|
| X4SKP Member Since: 29 Nov 2013 Location: Berkshire Posts: 2288 
|
 Are you sure yours wasn't an early prototype test vehicle for Skyfall 
Click image to enlarge SKIP https://www.defender2.net/forum/topic83242.html |
||
|
9th Feb 2020 11:37am |
|
| the gamekeeper Member Since: 01 Jan 2010 Location: Surrey Posts: 96  
|
Adjustments made on bulk head so it would site on chassis better
 |
||
|
9th Feb 2020 12:35pm |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3616 
|
Post up a link to your YouTube channel, Iād like to follow along.
|
||
|
9th Feb 2020 12:38pm |
|
| Gloucesternige Member Since: 17 Jan 2020 Location: In the garage Posts: 114
|
Here you go @Co 1
&t=309s Nige Check out my You Tube channel https://www.youtube.com/c/Defender90KeswickNigelsLandRoverchannel |
||
|
11th Feb 2020 1:10pm |
|
| Gloucesternige Member Since: 17 Jan 2020 Location: In the garage Posts: 114
|
Doubt it somehow... that looks much tidier than mine lol. Nige Check out my You Tube channel https://www.youtube.com/c/Defender90KeswickNigelsLandRoverchannel |
||
|
11th Feb 2020 1:11pm |
|
| Gloucesternige Member Since: 17 Jan 2020 Location: In the garage Posts: 114
|
I would like to write to someone at JLR and show them this dire rework.
Does anyone know an email address I can send the pics to? I don't expect them to do anything, but I just want to get it off my chest. Nige Check out my You Tube channel https://www.youtube.com/c/Defender90KeswickNigelsLandRoverchannel |
||
|
11th Feb 2020 1:16pm |
|
| Chugga90 Member Since: 07 Sep 2014 Location: Bucks Posts: 195 |
Kpalmer@jaguarlandrover.com
Works in the marketing department, probably be able to use it as a positive for the new alternative. |
||
|
11th Feb 2020 5:25pm |
|
| Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 
|
Nick Rogers ~ Engineering Director has just opened a Twitter account, post them up there...
Nick Rogers (@NickRogersJLR) Tweeted: Celebrating our New Defender, side by side with the original Series 1 icon š https://t.co/bLgE4r8rfF https://twitter.com/NickRogersJLR/status/1227229098054950913?s=20 |
||
|
12th Feb 2020 4:55pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
