DEFENDER2.NET - View topic - Diff oil and swivel pin grease mixing

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Diff oil and swivel pin grease mixing

Page 1 of 1

Print this entire topic ·

jfh

Member Since: 08 Jan 2014
Location: West Coast
Posts: 365

2007 Defender 110 300 Tdi SW Chawton White

Diff oil and swivel pin grease mixing

This thread refers:

https://www.defender2.net/forum/topic70611.html

So I'm trying to figure out all the parts that I will need to do this job. It's on a 2006/7 110 300Tdi
So looking at the attached picture, I will need the following:
7.FTC4785
8. FTC3276
11.FTC3276 (THE GASKET AT 11)
15.FRC2310
21.FTC3646 (THE GASKET AT 21)
22.FTC3648
23.FTC5268
24.STC3435
and a swivel pin seal an gasket LR059968 and FRC4206

Click image to enlarge

Does this sound correct? Any input will be appreciated.

6th Jan 2020 3:14pm

oneten110

Member Since: 02 Jul 2011
Location: Wish I was still in France
Posts: 741

Looks about right. Personally I wouldn't bother with the paper gaskets, I would use a gasket sealant type stuff as manufactured by Elring.
http://www.wilmink.nl/Elring/Elring_vloeibare_pakkingen.pdf It is not a Defender, it is a One_Ten

8th Jan 2020 3:55pm

jfh

Member Since: 08 Jan 2014
Location: West Coast
Posts: 365

Thanks I appreciate your help.

This setup differs a lot with my old '84 model's setup.

I use the paper gaskets but I give it a very very thin coating of sealant on both sides.

8th Jan 2020 4:01pm

windy81

Member Since: 14 Mar 2018
Location: North Wales
Posts: 311

that dirko smoo is the business

8th Jan 2020 5:12pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum