 | Home > Maintenance & Modifications > Difference between a 90 and a 110 NAS step? |
 
|
|
|
| X4CAC Member Since: 30 Apr 2018 Location: Midlands Posts: 212   
|
When I bought mine it came with the fixing brackets for both the 90 and 110 so suitable for either application.
This should help explain the difference... https://www.paddockspares.com/downloads/STC50301_vr1.pdf |
||
31st Dec 2019 11:03am |
|
| 90 Dreamer Member Since: 13 Jul 2019 Location: Oop North Posts: 2062 
|
As above pretty sure its simply a bracket issue rather than the actual step structure.......
|
||
|
31st Dec 2019 12:46pm |
|
| JimC Member Since: 22 Jan 2011 Location: NOVA Posts: 164  
|
If it’s a genuine step, then it is an issue of structure. New aftermarket bumpers are built to be universal, the original ones are for a 90 or a 110. A 90 bumper would fit a 110 but the bottom stays would not reach to the frame rail. A 110 Parts would not fit a 90 because the bottom stays would be too long.
|
||
|
31st Dec 2019 1:33pm |
|
| Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 
|
Also be aware there's at least two variants of the rear step bumper. The key difference is in the end flanges where they attach to the rear crossmember.
|
||
|
1st Jan 2020 8:49am |
|
| JimC Member Since: 22 Jan 2011 Location: NOVA Posts: 164
|
And I forgot I was replying in a UK forum, so most of what you’re seeing over there is likely the universal-fit variety.
|
||
|
1st Jan 2020 4:01pm |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3626 
|
Got it home today, it does indeed fit; just needs the support arms for a 90.
|
||
|
1st Jan 2020 6:37pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
