DEFENDER2.NET - View topic - another one for the sparkies...

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Off Topic > another one for the sparkies...

Page 2 of 2

Print this entire topic ·

Rashers

Member Since: 21 Jun 2015
Location: Norfolk
Posts: 3335

2014 Defender 110 Puma 2.2 USW Corris Grey

I know all the training providers are different, but I did mine in Norwich just before Christmas. I had two options. A short refresher and a longer course. If you are a bit out of date, I would not go for a refresher as the one I did was very rushed. Go for something a little longer.
In fact the people I used would only allow you to go on the refresher if you had a 17th edition amendment 3 City & Guilds certificate.
As with all things, it's a lot of money. Exam was multiple guess on a computer terminal. I believe everyone on my course got a pass. Let's face it, that let you have the regs book so you have the answers, it's just how quick you are at finding them

I now have to do a health and safety examination to get the 18th edition qualification put on my electrotechnical skills card (old JIB card). Another £50 or so...... and so the gravy train rolls on.

29th Apr 2019 3:52pm

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6264

2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey

Thanks for the info.

like you say 'gravy train'.

seems like I might have little choice re the long and refresher course....that said just pulled out my cert from 2012 and it seems to suggest it's a level 3. so perhaps I'll get away with the shorter one (even if it's not the best choice)?

29th Apr 2019 4:01pm

Rashers

Member Since: 21 Jun 2015
Location: Norfolk
Posts: 3335

Give it a go. You have nothing to lose

29th Apr 2019 4:07pm

Rashers

Member Since: 21 Jun 2015
Location: Norfolk
Posts: 3335

Out of interest I plugged your 300m of armored into the cable calculation software we use (obviously made a lot of assumptions!!)

16 Amp Type B MCB supplying a 10 Amp single phase load 10mm² 3 Core SWA in a duct buried at 600mm in the ground works.

So Brendan, you were spot on

As per my previous email about earthing and RCDs etc. etc. etc.

Hope that helps a bit

29th Apr 2019 4:19pm

Page 2 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum